instag8tr
New member
- 15
- 0
- 0
- Location
- omaha, Ne.
The vertical bar that holds all the mirror brackets broke. I can not seem to find a replacement. Anyone know where I can pick one up?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
mirror bracket
- Thread starter instag8tr
- Start date
instag8tr
New member
- 15
- 0
- 0
- Location
- omaha, Ne.
No one?
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
Could you post a picture of the part your referring to?
instag8tr
New member
- 15
- 0
- 0
- Location
- omaha, Ne.
I will when I get a chance thanks
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
It's made of steel, you could have it welded if one doesn't turn up.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Are we referring to the rod that the mirror head attaches to? If so you can use all thread as a stop gap measure.
- 6,983
- 2,518
- 113
- Location
- Montevideo/Uruguay
It is very common for that (threaded)rod inside the vertical pillar to rust away and the nut simply twist off at the first attempt for adjustment.
A piece of Ø1/4" "All-Thread", cut to 18-3/4 will help. Best if it was 1/4-28 UNF (fine thread)
See original dimensions here....
G.
A piece of Ø1/4" "All-Thread", cut to 18-3/4 will help. Best if it was 1/4-28 UNF (fine thread)
See original dimensions here....
G.
Attachments
instag8tr
New member
- 15
- 0
- 0
- Location
- omaha, Ne.
Perfect G. Thank you very much. Happy Holiday's to everyone