Doug D.
Member
- 51
- 27
- 18
- Location
- Winterville Ga
Anybody find a decent deal on the aftermarket mirrors that mount to the door hinge on hard doors?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mirrrors
- Thread starter Doug D.
- Start date
M1028A1ShelterCarrier
Active member
- 230
- 76
- 28
- Location
- Mammoth Lakes Ca.
Nope...I bought the garbage Jeep mirrors and they move at speeds over 25. I love the Chevy mirrors and if only someone would make me/sell the adapters.
- 1,091
- 1,985
- 113
- Location
- WOBURN. MA.
You can tighten the Jeep mirrors and mine don't move at all and work great. I have a light bar and made the stock mirrors useless on the pass side.
Mark
Mark
Doug D.
Member
- 51
- 27
- 18
- Location
- Winterville Ga
You have a link to those mirrors and the adapter plate?
I too would like the links to this setup. Looks a LOT better to me that what I have.
- 1,091
- 1,985
- 113
- Location
- WOBURN. MA.
The adapters make installation easy.
The jeep mirrors can be had on Amazon or Fleabay.
Jeep door mirrors
Jeep door mirrors to HMMWV X doors adapters.
X Door adapters
The jeep mirrors can be had on Amazon or Fleabay.
Jeep door mirrors
Jeep door mirrors to HMMWV X doors adapters.
X Door adapters
Doug D.
Member
- 51
- 27
- 18
- Location
- Winterville Ga
thanks Mark!
I think you meant them for military HMMWV, not the civi - try these:
https://midwestmilitaryequipment.com/aftermarket-mirror-adapter-plates-for-hmmwv-humvee-set-of-2/
And don't have a stroke when you see the price!
https://midwestmilitaryequipment.com/aftermarket-mirror-adapter-plates-for-hmmwv-humvee-set-of-2/
And don't have a stroke when you see the price!
- 1,091
- 1,985
- 113
- Location
- WOBURN. MA.
It's the same mirrors just re-boxed and increased the price.
Gee wiz - for the price you would think the adapter plates would not be crap!I think you meant them for military HMMWV, not the civi - try these:
https://midwestmilitaryequipment.com/aftermarket-mirror-adapter-plates-for-hmmwv-humvee-set-of-2/
And don't have a stroke when you see the price!
When I snugged down the mounting bolts, the plastic "plate", which is printed, compressed and the bolt and washer and did not leave a lot of material to hold it on. I would not be surprised when the plate just breaks off.
And the inserts they used are metric but the torx screws provided with the mirror are SAE? Off to the hardware store...
Last edited:
- 1,091
- 1,985
- 113
- Location
- WOBURN. MA.
Yeah the price is a bit high for sure but they do work well and mine have been on for a few years with zero issues. Sometimes you just have to bite the bullet.
Mark
Mark