seano11
Active member
- 878
- 103
- 43
- Location
- Edmonton Canada
I'm looking for a vechicle side plug in for my boiling unit. I currently have no way to heat up my maple syrup well out on tundra.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mre boiling vessel plug in needed
- Thread starter seano11
- Start date
- 2,975
- 4,356
- 113
- Location
- Olympia/WA
For your own use, you might be better off making a cable with the correct end on it, rather than trying to find something already made.
Mine I have what looks like a computer power cable that plugs into the NATO slave port in the truck. I think it's supposed to be for some type of battery charger assembly.
Something like one of these might be a good start; just take the end off the cable you already have and put it onto this:
graywacke.net
or if you don't want to disassemble that one, this thread has numbers for ordering the plug end and how to make one
Mine I have what looks like a computer power cable that plugs into the NATO slave port in the truck. I think it's supposed to be for some type of battery charger assembly.
Something like one of these might be a good start; just take the end off the cable you already have and put it onto this:
GEI-SLV-RA-12 Mini 90°NATO Slave Cable 12AWG - Graywacke Power Products
Low profile Mini NATO Cable
graywacke.net
or if you don't want to disassemble that one, this thread has numbers for ordering the plug end and how to make one
Best way to wire up a RAK15 ration heater?
Looking to wire up a RAK15 ration heater from scratch. Draws 24vdc 15 amps. 10 gauge directly from the batteries with 20 amp. inline fuse?
www.steelsoldiers.com
seano11
Active member
- 878
- 103
- 43
- Location
- Edmonton Canada
Thank you!!!!For your own use, you might be better off making a cable with the correct end on it, rather than trying to find something already made.
Mine I have what looks like a computer power cable that plugs into the NATO slave port in the truck. I think it's supposed to be for some type of battery charger assembly.
Something like one of these might be a good start; just take the end off the cable you already have and put it onto this:
GEI-SLV-RA-12 Mini 90°NATO Slave Cable 12AWG - Graywacke Power Products
Low profile Mini NATO Cable
or if you don't want to disassemble that one, this thread has numbers for ordering the plug end and how to make one
Best way to wire up a RAK15 ration heater?
Looking to wire up a RAK15 ration heater from scratch. Draws 24vdc 15 amps. 10 gauge directly from the batteries with 20 amp. inline fuse?www.steelsoldiers.com