Mule Roll Bar info

[rexman]

Hi looking to see if anyone has made a rollbar.or any ideas to adapt some thing else to fit.on ebay they are selling a pass rollbar that fits a polaris xp900 utv.but its 31" wide. But the seller gave me a phonenumber for the company in ind.am going to call see if they can sell me the overhead bar to 4' wide. But if someone has any ideas like to hear about them. My mule have a hyd lift Snow plow. And Winch on back end .I know .its because ya drive into trouble and Pull yourself out .Thanks Jim

 

[clinto]

I think to adapt something off the shelf to something as weird and specific as a mule would require so much modification that you'd be better off just building something yourself.

I can't imagine how to put an effective ROPS on a mule without having to hack the poor thing to death.

 

[11Echo]

I think to adapt something off the shelf to something as weird and specific as a mule would require so much modification that you'd be better off just building something yourself.

I can't imagine how to put an effective ROPS on a mule without having to hack the poor thing to death.

Couple from the net.

 

[rexman]

Thanks 11 Echo. Thats what i am looking for simple bolt on and not hacking up my Mule. Thanks

 

[redlight]

I have the roll bar from the red deck mule. it is for sale but I do not have a paypall acount yet to open a classified acount. please pm me off line at brucemccoy54@Gmail.com to discusss. I know it could be shipped by truck or we could meet halfway from Boston.

 

[Welder Sam]

I'm about ready to hack mine up.... into little bity pieces and haul it off.

 

[rexman]

Thanks for the Ideas,As to not Hack Her up.Had Plates made couple inches high With punched holes to mount behind the side rails,Areas were behind your rear,and the last one back,Had a friend make me 2 bars with a plate on bottom to to bolt to or weld to other plates,BUT HE MADE THEM OUT OF 2'' HEAVY STEEl PIPE,Too Heavy,Then the place shut down end of that till i can find some lighter,

 

[rexman]

Seen on ebay a roll bar for the crew cab/Polaris xp crew Sport Bar,lot of money for what it is would need 2 of them f&r But like to get the phone number of the company that make it. see if they could make me a couple hoops 49" wide x a little less than 4 foot high,Looking for a solid lead,To Add on Not chop up.my MULE

 

[byrdman1312]

If you use a rollbar, don't forget some seat belts! I rolled my mule in 1997, ran over a stump hidden in the weeds. I fell out, guess what crushed my left tibia in six pieces, the roll bar! Off work for 7 months, in the bed with external fixator on my leg for 9 weeks, 3 months physical "terror-py", had to learn to walk again.Still have a "bone knot" on my shin, a semi-stiff ankle, and a knee that just don't feel right. But, I can walk for miles, run a little, and still ride my mule! Be careful out there!

 

[rtk]

I have a nice roll-bar made out of nice heavy wall 2 1/2" aluminium tube that was on the Bama Mule I picked up . It is FREE for the taking , pm me I can send you better pictures . Hound DOES NOT go with the roll-bar ! LOL , bob k

 

[Welder Sam]

I just put my welder on mine. Screw it.

 

[rtk]

Some pictures of the roll bar that is up for grabs . I listed it in the classified's. I have no need for it . PM me for details . bob k