- 7,584
- 363
- 83
- Location
- Cheyenne, WY
So I got asked about my tow lights. Here is a pic, they are semi easy to find and a similar set could be easy to make. Hopefully this helps those new to MV's.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MV Tow Lights
- Thread starter hndrsonj
- Start date
- 34,012
- 1,809
- 113
- Location
- GA Mountains
Wow, those are nice. The cord seems more difficult to find than the bar. A while back when the market got flooded with rear LEDs I found myself buying them often. My lightbar got the first pair and they work great behind the CUCV too. Oh, they fit great in a medbox too.
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
I have been wanting one for awhile now, as many pickups and recoverys I do for myself and others. Just can't justify the prices I've seen.
I made a quick set with some angle and two rear LEDs. Work ok but I would like to get the real deal or build something very close one day.
That is a nice looking set!
I made a quick set with some angle and two rear LEDs. Work ok but I would like to get the real deal or build something very close one day.
That is a nice looking set!
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,132
- 113
- Location
- Athens, Ga.
I built a ludicrously cheap and terrible looking tow light setup with a couple of the cheap eBarf LED's and some various garbage from Home Cheapo. They work on military 10 pin 24V and civvy 7 pin or 4 pin setups.
Attachments
Last edited:
- 34,012
- 1,809
- 113
- Location
- GA Mountains
I think it looks fine Clinto. Not everyone buys their tow light set on Ebay for $75 Not everyone gets 2 bars and one new cable for that same $75. Shhh, don't tell Ron that I paid that little, I sold him the extra bar for a whopping $40.
- 14,640
- 4,820
- 113
- Location
- Buchanan, GA
Can we get another take of picture number 1? This time, pan the camera up though.
We made our own. When looking for a set we could only find people asking $350+ for them. Since we had a new set of rear MV lights sitting around we decided to put them to use. Bought some regular clearance lights and put 24v bulbs into it.
Just got a 2x2 tube of aluminum and bolted the lights to it. We put loops on the back to let us connect straps to it and to the vehicle.
Used a plug we got off a scrapped trailer and bought around 40 feet of cable/wiring. To make things easier when installing the lights on the truck, we used a standard civi 7-way plug as a quick disconnect.
Pic of it sitting on the front of a truck. Forgot to leave the straps on when we took the pictures.
Just got a 2x2 tube of aluminum and bolted the lights to it. We put loops on the back to let us connect straps to it and to the vehicle.
Used a plug we got off a scrapped trailer and bought around 40 feet of cable/wiring. To make things easier when installing the lights on the truck, we used a standard civi 7-way plug as a quick disconnect.
Pic of it sitting on the front of a truck. Forgot to leave the straps on when we took the pictures.
Attachments
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
I think I paid $250 off ebay. They were NOS in a box!
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
I could use a set
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Are these what you are looking for?
