rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
http://youtu.be/vCOWIJpnE8k
I don't know how to post picts,I used to be able to post vid on youtube but now that has outsmarted me also.I simply did the bypass,went 1/0 gauge from front batt.poss to a 140amp cir.breaker,then 1/0 ga. to a reducer 1/0 ga to dual 4ga to 8ga splitter to the 12v power source and the the gp solenoid.,I used 8ga cable to both 12v and gp solenoid.I also put fuseable links on each 8ga. just in case circ.breaker failed and I needed to bypass it in a limp home mode.This set up is overkill but I had the stuff laying around and was able to use it.I also added lots of grounds,8ga from 12v alt to frame,4ga from core support to frame,1/0 ga from motor to ground buss,1/0ga from frame to ground buss and 1/0ga from front batt to buss.Sorry guys I just learned how to add videos,I still need to upgrade my starter cable to 1/0 gauge.Got a picture of how you wired it up. I was contemplating bypassing my resistor when i put in new glow plugs.
Last edited: