My 5 ton was making a funny noise and now it won't start....

[acesneights1]

Gee what could be wrong ??
Warning: Contains serious carnage, not suitable for MV owners with weak stomachs...

 

[jbayer]

JB Weld?

 

[FloridaAKM]

You can tap all that back into place & it will buff out fine!





But it will require a another engine to be drivable again. How did you get home safely?

 

[74M35A2]

Cummins 250 for sale. Ran when parked. Needs work.

simp you got your ears on?

 

[infidel got me]

nice

 

[fuzzytoaster]

It's still 92% there and that's still an A!

 

[dmetalmiki]

As said, just how did you get it home from the incident?. And any pictures of the road side event, Good luck with the re fit.

 

[Jermyjudge]

will it still crank? I have heard the 250 cummins will run with a hole in the block the size of size 10 shoe.

Sent from my SM-G930V using Tapatalk

 

[98G]

Wow!

Stock motor?

 

[EO2NMCB]

What's the story behind the air conditioning ?

 

[wreckerman893]

Holy engine batman!!!!!!!!!!!

 

[Swamp Donkey]

So that's what they mean by naturally aspirated...

 

[acesneights1]

As said, just how did you get it home from the incident?. And any pictures of the road side event, Good luck with the re fit.

Sorry, first chance I had to respond. I flat towed it with my M923 which developed a nasty vibration en route to go get the 818.
I bought the truck that way to harvest for parts for my M813 rebuild so no idea how it happened as the guy I got it from also bought it that way and did not get the story behind it.
It has a HD Holland fifth wheel on it and looks like they were using it in a civilian commercial capacity and most likely pushed it too hard. These motors don't like to be pushed and this one pushed back. Sad, it only had 60k on it. Not much salvageable on the motor it self. it tore the pump right off the compressor.

 

[acesneights1]

Of course not the dilemma is...do I harves it for my M813 Cargo or Harvest the M813 for this truck....Decisions decisions...
M809 series IMHO are bad asses of all 5 Tons. They just look tough.

 

[TCD]

FYI: Stitching Iron

Howdy,

Have you seen this before?

Stitching cast iron & aluminum:

http://www.locknstitch.com/index.html

Don't miss the FAQ and parts for sale info at the bottom of the home page!

Stitching the side of the cruise ship engine:

http://www.locknstitch.com/pdf/cruise_ship_repair_final_report_2011_new.pdf

I first saw this on Jay's link:

https://www.youtube.com/watch?v=qZUGghzkwVQ


Pretty amazing!

Happy Tails,


tom n tyler

 

[BigDawg41]

I found this page in the TM for you. I see you already removed the fuel pump as in step 5 (A) of testing. Does the engine turn over now? Just kidding,sorry for your loss.

 

[acesneights1]

Even the Oil pan is literally cut in half..

 

[acesneights1]

Howdy,

Have you seen this before?

Stitching cast iron & aluminum:

http://www.locknstitch.com/index.html

Don't miss the FAQ and parts for sale info at the bottom of the home page!

Stitching the side of the cruise ship engine:

http://www.locknstitch.com/pdf/cruise_ship_repair_final_report_2011_new.pdf

I first saw this on Jay's link:

https://www.youtube.com/watch?v=qZUGghzkwVQ


Pretty amazing!

Happy Tails,


tom n tyler

Ummm...I think it's beyond that...

 

[acesneights1]

I found this page in the TM for you. I see you already removed the fuel pump as in step 5 (A) of testing. Does the engine turn over now? Just kidding,sorry for your loss.

 

[acesneights1]

Question is...Repower or recycle ???
My M813 needs Cab and alot of nick nacks...