• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

My first MV, an M43.

Tinwoodsman

Well-known member
Steel Soldiers Supporter
3,923
76
48
Location
Comfort, Texas
Make sure you get the right head gasket for that particular block. There are several types and if you do not get the right one it will leak coolant like crazy.
 

dbcolts

Member
38
0
6
Location
Palm Desert, Ca
60Buick
You did the right thing by pulling off the head. When we decide to get an engine running......after it set for 40 years.....we run a compression test. If they are mostly zeros....we pull the head. And most of the time its the "gundge" that is holding the valves open. We us a special elixir that is made up of 50/50 acetone/ATF. Works great. And we hook up a 12 volt batter to the starter.....as it turn the engine over faster.....and it won't hurt the starter. PS---don't turn on any lights, etc.
PPS---One time I pulled a head and found that most of a piston had broken off, and had ended up getting discharged out the exhaust valve....a few were in the crankcase.
David
 

60Buick

New member
43
2
0
Location
Bethlehem Georgia
I got all the valves freed up. I wish I had known about your 50/50 elixir yesterday. I used carb cleaner and PB blaster. It worked but was slow going. I swapped the oil lines to the filter, got it fired up and the engine runs good. I took it down the street and made it about 300 yards where I promptly ran out of gas. Sending my other half to the gas station fixed the issue but created another. She was not a happy woman for the rest of the night.

The brakes feel like they are dragging. I need to see what's going on there. Other wise it's time to get the lights going.
 

dbcolts

Member
38
0
6
Location
Palm Desert, Ca
LOL! I understand the situation with your wife.........been-there, done-that. Flowers usually fix most faux-paus like that.
Re: draaaagging brakes....You probably have a stuck wheel cylinder. If they've sat for over a year.....humidity builds up in the cylinders, and the alloy pistons corrode and "stick".
Keep Wrenching
David
aa.jpg
 

60Buick

New member
43
2
0
Location
Bethlehem Georgia
I'm leaning more towards I have the adjustment off on the parking brake or a shoe. All the wheel cylinders were just rebuilt. I'm just glad it is mobile!
 

60Buick

New member
43
2
0
Location
Bethlehem Georgia
Success! Made it out on the open road and home with no issues! Just went to the gas station and back, but hey it runs. Starting it took a bit. It starts and that took a little doing. It ran on Just a few cylinders for a few minutes before the others picked up and it ran on all 6 . It was very hard to start. Where should I start? Could the valves be hanging again, carb, fuel pump, ignition system? The plugs are new the rest are old. ideas? Also way down on power. I don't know what it should do but I have to down shift to third on mild hills. Is that normal? My only basis of comparison that is in the same realm is a 50 Ford with a flathead V8, but it fells much more ballsy power wise. Any thing I should start looking at to see if it's in need of adjustment or replacement? Thanks! 20160801_184231.jpg
 

Gunnermac

Chief
383
107
43
Location
Athens Ga.
We are in the process of restoring one now, when I got it the old 6 cylinder had a broken rod, pulled it out and installed a small block 350. I know, the purists will get their panties in a wad, but if you are going to drive it, it makes an enormous difference. If there are no serious problems, I should have it at the Ga Rally. The one I have is painted a med to dark blue inside. Air Force Truck??, also I believe the seat is the same, will make sure in the morning. Don't know anything about my trucks past. I bought it from a scrapper. If you are going to be in the Athens area, let me know and we can compare notes.

Mac
 

dbcolts

Member
38
0
6
Location
Palm Desert, Ca
I bet mine is uglier than all of your's! LOL!! Usually if the truck will start at all......and it appears to not running on all cylinders. Its because some of the valves are sticking "open". We buy and sell about 25 non-running trucks a year......that we get running. And 9 out of 10 have stuck valves, as the main problem.
Davida.jpg
 

billyzz

New member
211
2
0
Location
rapid city sd
I bet mine is uglier than all of your's! LOL!! Usually if the truck will start at all......and it appears to not running on all cylinders. Its because some of the valves are sticking "open". We buy and sell about 25 non-running trucks a year......that we get running. And 9 out of 10 have stuck valves, as the main problem.
DavidView attachment 636844
Yers is uglier
But you got that groovy orange light!
Is that drywall mud smeared all over it?
;)
 
354
5
18
Location
Orem, Utah
Man this is cool, I own a 1962 M43B1. I love it and it is definitely one of my favorites. The whole time I read this thread I think about all the stuff I could get accomplished if I just had one project. When we restored ours, we did a motor pool restoration. Our disassembly consisted of taking the lights and bumper off. Maybe a few other parts, cant really remember. Ours had quite a bit of rust, took a year to get most of the rust cut out and panels replaced. We didn't do anything to the interior of ours, it is exactly how we found it other than a few holes cut into it to access some rust issues. Our interior lights and fans do not work yet, but it looks really good. Let me know if you have any questions, but for now I am going to sit back and follow your restoration thread. Honestly, if I had more money time and space, I would buy another m43 or similar truck. I love Military ambulances.
2cents:goodjob:
AMbulance and tent cropped.jpg20141101_212823.jpgIMAG2490.jpg
First is at a show, and the night we finished, and then before pic.
 

60Buick

New member
43
2
0
Location
Bethlehem Georgia
20160825_193717.jpg
20160825_194418.jpg
20160902_190808.jpg
20160902_191013.jpg
20160906_195135.jpg
20160908_201738.jpg
20160916_223258.jpg
20160916_223309.jpg
20160916_223324.jpg
20160918_090658.jpg
Some progress. Step 1 was getting it running and to my shop. Then the aggravation, I mean the fun begins. I saved every piece possible that is original to the truck including all the bumpers. I Was able to get 4 stretchers a medical blanket and some IV poles off Ebay. I cut out all the rust and welded in the appropriate sheet metal. I didn't strip it to the metal, I just sanded and smoothed all the chips. I am not after aperfect show vehicle. There was filler in the front fenders and rear doors that I removed. I wanted the dents, each one tells a story. The roof was a mouse nest for years. I pulled at least 2 trash cans of mouse bodies, poop and seeds from over the drivers compartment. It was nasty. The body was not to bad other than under the rear doors and the roof. They were rotten.
 

60Buick

New member
43
2
0
Location
Bethlehem Georgia
20160918_090729.jpg
20160918_094042.jpg
20160918_183150.jpg
20160918_183200.jpg
20160918_183301.jpg
20160918_183253.jpg
My better half helped me scuff the Primer and shoot the Gillespie OD green. We also got 3 of the 5 tires mounted yesterday. All my markings are in as well from Military Stencils. They look excellent. I don't think the truck looks to bad for a few months work.
 

Another Ahab

Well-known member
17,994
4,545
113
Location
Alexandria, VA
My better half helped me scuff the Primer and shoot the Gillespie OD green. We also got 3 of the 5 tires mounted yesterday. All my markings are in as well from Military Stencils. They look excellent. I don't think the truck looks to bad for a few months work.
The truck looks real fine from here. That's nice work. [thumbzup]
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks