• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

My Homemade Steering Wheel Puller

harleyboy1

Member
51
0
6
Location
Lake City, Fl.
I have found that it's not easy to find a surplus (correct) steering wheel puller. For some reason flea-bay is listing pullers @ $100.00 or more. So after finding a nice used wheel for $30.00 the owner has no means of removing it without damaging it. After reading our site I took some of you guys ingenious ideas and this is what I came up with.

puller 002.jpgpuller 003.jpgpuller 004.jpgpuller 005.jpgpuller 006.jpg
 
Last edited by a moderator:

3dAngus

Well-known member
4,719
101
63
Location
Perry, Ga.
I'm so jealous of you talented guys who can weld.
I was hoping someone would post pics of a homemade steering wheel puller, because I am probably eventually going to have to make my own for a M-37, where I hope to buy a new steering wheel and replace it.
Thanks for posting. Nice work!
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
Dell, I sold my last one to Poppop at the GA Rally. I'm reasonably certain he would share if you asked.
 

harleyboy1

Member
51
0
6
Location
Lake City, Fl.
No pics of the steering wheel off. Did it work?
Yes, it worked to easy. I did what you guys said, take steering wheel nut off and spray spline area with BP Blaster for a couple days. I found a used wheel, but the guy can't get it off without damaging the wheel so I'm going to send him this set up for removal.
 

harleyboy1

Member
51
0
6
Location
Lake City, Fl.
I'm so jealous of you talented guys who can weld.
I was hoping someone would post pics of a homemade steering wheel puller, because I am probably eventually going to have to make my own for a M-37, where I hope to buy a new steering wheel and replace it.
Thanks for posting. Nice work!
I'll be more than happy to send you this set up when you need it. Art Butler 386-867-0952
 
Top