• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

My M880 Thread (pics plus bonus M882)

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
Still using the agricultural tires from Iowa DNR. they became a low priority with everything going on, and the delay in starting work. I do need new rims and tires, but just holding off for now.
 

NDT

Well-known member
Steel Soldiers Supporter
10,436
6,486
113
Location
Camp Wood/LC, TX
I've been trying to figure out this tire issue for months now. I have decided to go 16". Going US owned on the tires leaves me with the Goodyear and Cooper. I can't decide between the Goodyear Wrangler Authority from Walmart and Cooper ATP or ST MAXX from Discount. The GYs are $832 out the door, the ATPs are $861 and ST MAXX are $925. This is 4 ea 265-75R16E.
 

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
Yeah, I'm planning on dropping down to 16" as well. I think I was looking at Wranglers. I may also look at something a tad more "Exotic" like Nittos or similar. I use Nitto Trail Grapplers on my truck
 

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
Truck is looking good. I see what you mean about the tires. Do you have plans to replace them?
Plan is get some 16" rims that look as similar as possible and a decent set of off roadish but street-able tires to go on the rims. Beyond that, no plan yet. spent what was going to be tire money on the Pioneer.
 

michigandon

Well-known member
1,442
82
63
Location
Wake Forest, NC
I would also like to add that big megameats like HMMWV tires are too much of a strain on the wheel bearings in the front Dana 44.

I personally would go no larger than 285/75r16s myself.
 
Last edited:

RichM882

Member
101
0
16
Location
Leeds, England
I have some new 305 70 16 Grabber AT's that I bought for my old Landcruiser but never fitted. I was considering obtaining some 16 inch rims and using them. Do you think this is a bad idea ?
If you think 16,5" tyres are unobtanium in the States you should try getting them here in the UK !!!! I have a pair of Dick Cepek 33x12.50x16.5 tyres I bought for my last M880 twenty years ago !!! I let my friend 'borrow' the other two. I never got them back....
 

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
I have some new 305 70 16 Grabber AT's that I bought for my old Landcruiser but never fitted. I was considering obtaining some 16 inch rims and using them. Do you think this is a bad idea ?
I think that'd be a pretty good idea actually! Those are one of the styles I would be looking at honestly!
 

Bob H

Well-known member
Steel Soldiers Supporter
3,140
160
63
Location
Huron National Forest, Michigan USA
Been running 36" Humvee tires for over 8 years on this truck.
im001347s_153.jpgIM001632s.jpg
Been running 285/75-16's, plowin' & wood haulin' for years with this one.
IM002600s.JPG

I've had M880's around for over a dozen years & have never had a wheel bearing failure on the D44 fronts. or any other axle component failure.
Now I have broke a few parts on the front axle of this one with the 17" wide 40's .......
lnl.jpg
 

N1265

Active member
1,000
5
38
Location
Fremont, Ohio
I went with 16" rims off a 3/4 ton dodge van, with 16" Firestone directional snow tires ( winter force ) P265/75-r16. They work great but I wish I would of went with a slightly shorter tire, That way I could of got my truck in the garage with out taking off my plow light.
 
Last edited:

bikeman

Well-known member
Steel Soldiers Supporter
2,894
501
113
Location
Ft. Bragg, NC
That looks great man. I have a line on some 16" solid rims, hoping to have enough to do a total replacement. I don't have to worry about a garage right now... heck, my daily driver only makes it into my parents garage by a matter of an inch or two...
 
235
2
18
Location
Dayton, OH
I went with 16" rims off a 3/4 ton dodge van, with 16" Firestone directional snow tires ( winter force ) P265/75-r16. They work great but I wish I would of went with a slightly shorter tire, That way I could of got my truck in the garage with out taking off my plow light.
Just as a matter of curiosity, what model year 3/4 ton Dodge van did you use to source the 16 in rims? I'm running the oem 16.5 in rims on my M882 now, but 16 in rims might be easier to find tires for when the time comes.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks