My M915

[panzerwillie]

Ok so the oil filters and fuel filters are painted does anyone no the part # there is 2 oil and what looks like a fuel filter but also painted thx

 

[simp5782]

Ok so the oil filters and fuel filters are painted does anyone no the part # there is 2 oil and what looks like a fuel filter but also painted thx

M915 Series Parts Spreadsheet

docs.google.com

Fuel filters can be FS1212 or FS1000 depending on what micron you want

 

[Mullaney]

M915 Series Parts Spreadsheet

docs.google.com

Fuel filters can be FS1212 or FS1000 depending on what micron you want

.
Thank you sir - for the M915 Parts List.
Now I just need the 915 that would use those parts...

.

 

[panzerwillie]

Thank you for all the info...

 

[simp5782]

Here is a build thread so you know what is and isn't gonna break in the long run.

Simp's M915A1 Build Thread

Simp's M915A1 and M920 Build Thread Picked up an 1984 M915A1 off of GSA for $3,156.00. Listed as a non runner. Truck was used at the Oklahoma State University Ranch site so basically it hauled cows. They said it had not been started in 4 or 5 years. 140,300 miles on the ODO. Rebuilt as RSMS at...

www.steelsoldiers.com

Also a 915A1 with 445 65 22.5 steers and 12R24.5 Goodyear G177 drives

 

[panzerwillie]

Very good looking truck, thx for sharing it...

 

[swbradley1]

.
Thank you sir - for the M915 Parts List.
Now I just need the 915 that would use those parts...

.

You and me both.

 

[panzerwillie]

I pick up the filters today and the fan switch NO 190 degree will try to work on it this weekend and will soon prepare for painting... of course it rains everyday here for the next few months maybe will wait for fall to paint...

 

[Floridianson]

Looking good. So what are you going to pull with it. When I had my first 915 is was going to delete the engine coolant to fuel line heat exchanger that is under the cab driver side. Being in FL myself not worried about gelling fuel. Thought about just getting rid of it or a fuel cooler in it's place but trade the truck before I did the mod.

 

[panzerwillie]

Good information did not know it had one , have not look under truck but hopping this weekend , not sure weather I make it a dump truck or keep like that and run a dump trailer but will see once the Allison 4500RDS is inn it with the wet kit , may still strech the frame and drop a third axle also but a length that I would be able to put a dump body on it , either way looking by summer next year...

 

[panzerwillie]

Does anyone know where the vin the is in the truck thx

 

[simp5782]

Does anyone know where the vin the is in the truck thx

Just on the door plate

 

[panzerwillie]

I do not see the 17# vin on there but will check again sundsy

 

[panzerwillie]

Here is the other plate

 

[simp5782]

I do not see the 17# vin on there but will check again sundsyView attachment 900191

There isn't one. Only that vehicle mfr serial #. They didn't stamp the frames on most of em.

 

[panzerwillie]

Ok so there was never a 17 digit vin # very interesting the title has it ,will see what the tag agency has to say about I have to bring the truck to them to do title transfer...

 

[simp5782]

Ok so there was never a 17 digit vin # very interesting the title has it ,will see what the tag agency has to say about I have to bring the truck to them to do title transfer...

They probably used the registration # followed by the serial #. That's 16 but not what all states do. In TN I can give it any vin # I want 4 to 17 digits if it's beyond 15years.

 

[panzerwillie]

Ok thank you for the information will probably do that with in the next month , want to go over the truck and do some fuel mods and some more gauges just for a start...

 

[panzerwillie]

So I work on the battery trade as it was apart when I got it and put some new cables and a battery switch..

 

[panzerwillie]

Here is the switch