- 10,458
- 6,534
- 113
- Location
- Camp Wood/LC, TX
Battery tie down?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
My M915
- Thread starter panzerwillie
- Start date
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Yes working on that , I want to make sure they stay in place even on a roll over
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Got some time free over the weekend and check out AC and was able get it to cool , was surprised the low side did not want more than 20lb of pressure anything higher would make the high side to kick to over 300lb and make compressor turn off not sure is correct but is ice cold and the weather here is been brutal for the last 2 weeks with record heat everyday, took it out for a 30 minute ride and nice and cold also did some traction paint in some spots may do some more before I paint it back to 383 paint for now everything is working good...
Attachments
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Remove the brush guard today will remove bumper next week as I prep the body for paint more to follow..
Attachments
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Removed the lights and grill for painting wanted to check all lines for the coolers and AC. More to follow..
Attachments
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Even do I'm not a big guy I felt I was to closely to the wheel so I put a Amprap seat for now..
Attachments
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Got some paint done
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
- 14,260
- 1,759
- 113
- Location
- Dayton, OH
Looking good. I'm looking to convert mine back into a tractor.
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Got grill back on
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Got grill back on
- 14,260
- 1,759
- 113
- Location
- Dayton, OH
Much as I would like to take the grill off mine so I could replace the expanded metal where someone cut it to get to the cooler I doubt I could stand drilling out that many rivets.
But good job.
But good job.
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Thank you but the grill will come off with the frame is rivet it to however it requieres lifting the hood in the front where is bloted to the grill frame..
- 14,260
- 1,759
- 113
- Location
- Dayton, OH
This is not a pic of mine but it shows the same number of rivets. Are you saying the grill can be removed without removing them? That I could do to replace the metal.
Y
Yes the grille only has small screws holding it in from the back side
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
Yes look at the grill carefully is bolted to a skeleton frame thats bolted to radiator support , the only thing is the hood center rod bolts to tha skeleton as well, you will need to suspend the hood while you doing the repairs. Once you do that you can remove the grill attached to the skeleton frame i almost did that but i wanted to paint the hood on truck. I study it for a while to make sure it could be done and it seem possible..
- 14,260
- 1,759
- 113
- Location
- Dayton, OH
Thank you. I'll just watch you save me lots of time. 
panzerwillie
Active member
- 984
- 145
- 43
- Location
- miami florida
NP, look at it and you will see how its put together..