wehring
Active member
- 1,375
- 26
- 38
- Location
- Angleton, TX
What say ye?
Justin Wehring
979 997 3112
Justin Wehring
979 997 3112
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
My version of rear exhaust
- Thread starter wehring
- Start date
73X
New member
- 311
- 9
- 0
- Location
- Farmington Hills, MI
More pis plz. looks good so far.
Nonotagain
New member
- 1,444
- 41
- 0
- Location
- Parkville, MD
Too close to the tail light. You'll find that the light will be covered with diesel soot in no time.
Any possibility of turning the pipe toward the ground and lengthening it a bit?
Any possibility of turning the pipe toward the ground and lengthening it a bit?
jeep-Jeep
New member
- 304
- 1
- 0
- Location
- Liberty Hill Texas
I like it its out of the way and loud 
booger
Member
- 346
- 2
- 18
can we see how you did the front?
- 10,442
- 6,494
- 113
- Location
- Camp Wood/LC, TX
No good for high water work.
wreckerman893
Possum Connoisseur
- 15,629
- 2,053
- 113
- Location
- Akenback acres near Gadsden, AL
You need dual stacks like I had on my bobber.....I made them out of HUMVEE fording kit exhaust pipes. Gave it a mellow sound.
Or....if your are going to run it out the rear.....ya got to balance it out and have two.
Just my HO.
Or....if your are going to run it out the rear.....ya got to balance it out and have two.
Just my HO.
tm america
Active member
- 2,600
- 24
- 38
- Location
- merrillville in
looks good so far
rockman
Member
- 795
- 3
- 18
- Location
- Kingsport, TN
nice, how does it sound?
feets
New member
- 38
- 0
- 0
- Location
- Dallas, TX
That tail light will be toast in no time. have you seen the diesel soot built up on class 8 trailers? You can also look at the back of dually pickups and see the bumper and fenders are sooted up badly.
bryan70546
New member
- 410
- 1
- 0
- Location
- Lake Charles La
I got soot on my taillight please .....................it washes off 
mudguppy
New member
- 1,587
- 15
- 0
- Location
- duncan, sc
i like it. i think you'd be fine if you rotated the outlet down towards the ground. as requested previously, how about some more photos of the routing up front, please? i'm interested in possibly doing something just like this to get the J-pipe out of the fender for more tire clearance.
RANDYDIRT
New member
- 403
- 4
- 0
- Location
- Furlow Ar.
I want to hear it man! I would love to get the noise out the back and still have the good sound. My whistler is driving me nuts.
feets
New member
- 38
- 0
- 0
- Location
- Dallas, TX
Diesel soot is one thing. Diesel heat melting wiring and cooking the tail light is a different story.
Route it away from that light and it should be OK.
Coldfusion21
Member
- 227
- 6
- 18
- Location
- Tualatin, Oregon
Don't own any diesel vehicles but I highly doubt much heat is gonna make it back there.
jeep-Jeep
New member
- 304
- 1
- 0
- Location
- Liberty Hill Texas
jeez its a hot rod bobber deuce
move the light if its that much problem.
or cut in a led like i have on my rock crawler jeep
its not like its got to remain original at this point just functional.
move the light if its that much problem.
or cut in a led like i have on my rock crawler jeep
its not like its got to remain original at this point just functional.
nk14zp
Active member
- 2,636
- 17
- 38
- Location
- Columbia Falls Maine
Look's good.
wehring
Active member
- 1,375
- 26
- 38
- Location
- Angleton, TX
lights
Thanks all for the light cautions. I bought an M105A3 for this reason. The bed has the lights molded in to the body next to the tailgate. I will perform the transplant over the Christmas break.
The one I bought is tan. This is a ref pic.
Justin
Thanks all for the light cautions. I bought an M105A3 for this reason. The bed has the lights molded in to the body next to the tailgate. I will perform the transplant over the Christmas break.
The one I bought is tan. This is a ref pic.
Justin
Attachments
booger
Member
- 346
- 2
- 18
That'snice...how did you do the front of the exhaust?