NC to GA and back

[CGarbee]

I will be making a run before the end of October from Raleigh down to MCLB Albany, over to Atlanta, then back up to Raleigh. I'll be driving my M35A2C and will have a generator in the back of the duece from Albany back to Raleigh and a loaded trailer from Atlanta north, but there is room for small stuff headed north, and the complete truck is empty headed south...

PM me if you have needs...

 

[Blythewoodjoe]

You're a brave man Cabell. And you have too much time on your hands. I think Blythewood would be out of your way but if it isn't you should come by and see if you need any junk from my yard

By the way, I don't need those tires any more. I did the official southern cracker thing, I put a mobile home axle under the trailer. Speaking of which if anybody wants an axle and a couple of rims for a M101 with the five lug rims, it's your for the taking. It does have cuts on the tube were I had to cut off the pieces that hold the u-bolts to the axle.

Joe Trapp

 

[CGarbee]

Re: RE: NC to GA and back

Speaking of which if anybody wants an axle and a couple of rims for a M101 with the five lug rims, it's your for the taking.

Joe Trapp

Hey Joe, put that axle and the rims in my pile and I'll swing by and get them on the way home... You're not far off the trail, and I need to check out your yard...

 

[AMGeneral]

Any chance you could swing by and pick up a set of chains from ADR's house Cabell?

 

[alphadeltaromeo]

I live in Carrollton, GA for reference. Depending on the day, I may be able to meet you to save you some time.

 

[FrankUSMC]

Garbee
The M35A2C!!!What are you doing????putting that many miles on her new shoes???
Think about it...5 ton dump..power steering... more power...and when you get home after that looooong and tiring trip. All you have to do is pull a lever....wam, the truck unloads itself!
A concerned friend from the coast.
Frank USMC