Need 250 cummins injector pump

[jcappeljr]

I think the IP went out of my M817 ,it wont even try to start when you put the fuel line coming from the fuel filter into a can of fuel.I even tried screwing in the fuel selinoid screw.

 

[73m819]

could be your sucking air

 

[steelsoldiers]

If you can't find one, then you can always have yours rebuilt. I had one redone for around $250. Any reputable IP shop should be able to handle it.

 

[ncduece]

try using a outboard motor primer bulb to prime it with, there is an air bleed screw up by the air intake preheater crack that then prime it with the bulb. even after that its a pita to get it started, i have to use ether to get it to start after a lot of air gets into it,

 

[TroyHog]

I may have IP's for your rig - if your still in need of one.

 

[jcappeljr]

I needed it 4 years ago.This is a old thread.thanks anyway.

 

[TroyHog]

Sorry - my Bad. Hopefully the IP's will last longer than batteries these days! But if you need one - holler.