Need a better vacuum source

[Dan6wd]

I purchased a mighty 2d diesel injection cleaning kit from a local auto shop in my town. I decided to put the hose down the pipe leading to the turbo, since I didn't want to replace the gasket leading to the intake manifold from the turbo. I throttled up the duece and sparayed the entire can into the charge pipe. I didn't notice any blake smoke, rpm changes, or any other indication that the cleaner was doing anything. it's lie one of those upper intake cleaners for cars that utilize the iv type, with a hose pluggiung into a vaccum source. Yes there was alot of suction in the pipe! I almost lost the whole can down the pipe! My question is does anyone know of a better vaccum source for hooking up the iv hose? i know diesel's do not have the same type of vaccum that a gasser engine has, but there has to be somewhere better. I felt like it wasn;t making its way throught the intake side of the turbo's compressor wheel into the intake. I guess I could buy a gasket next time and unbolt the intake form the turbo charge pip, thus bypassing the entire turbo, unless someone else has a better idea.

 

[m-35tom]

there is a 1/8" pipe plug on top of the intake that has 'vacuum' at idle, but you are wasting your money with this type of thing. just put a cleaner in with the fuel.

 

[ironhorsethegeneral]

to get sludge out of the system use BIO CON from NAPA it works great.

 

[Dan6wd]

Thank you, the both of you!