• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need help finding correct tie rod for M1009

478
12
18
Location
Tucson AZ
The moog website part numbers for a suburban are good for the 10b in a m1009. You can contact customer support to verify part numbers. The moog parts might not be as nice as the ORD but they are definitely an upgrade from stock.
 

gweis12

New member
3
0
1
Location
frankfort, il
I'm replacing a bunch of the front end components on my Blazer rust wagon before I get a new set of rubber. Darn near every tie rod has excessive play in the joint and I want to alignment.

My problem is that I cant find the tie rod at my local parts stores. I referenced the TM and it comes back with a left and right tie rod end, the adjustment sleeve and a center adjusting tube. Mine has a one-piece drivers side rod end that runs all the way to the adjustment sleeve on the passenger side. I can't seem to find this part anywhere! I feel like I'm missing something or maybe I'm just losing it altogether aua

Anybody have any tips?

View attachment 722762

View attachment 722763
 

gweis12

New member
3
0
1
Location
frankfort, il
Tom, I have a CUCV-M 1009. I went to replace the tie rod end...it will not come out. I put a torch to it...nothing. It will not come out. I went to the Chevy Dealer. GM no longer makes the part. Can you recommend a place that sells that 5 foot tie-rod. Thanks, Gary
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks