need M200 genset trailer parts

[maddawg308]

Does anyone have a junker M200 genset trailer that has some odds and ends parts on it? Mine is missing a bunch of brake and handbrake parts, the chains are missing the hooks, brackets, etc. Let me know if you are parting one out, please. Thanks.

 

[doghead]

Daniel should have/did have, one or two of them.

I have a bunch of chains, pins and misc stuff from one. Maybe post some pics of your and we can see what you need?

 

[maddawg308]

Will get pics in the next couple days. The parts I need are FOR Daniel's old M200. He has sold the other one as well.

 

[Chief_919]

Doghead may be able to help, I got some parts from him.

 

[319]

I have air/hyd parts, see photo:

 

[peecook]

i have two m200 antenna trailers i am actually removing parts from now, both getting recycled next week. i can remove anything you want from them, right now air hoses, support legs, some fittings are removed. still have the whole brake systems, tank, lights to go. PM me with what you need.

 

[BKubu]

Check with John Winslow. I believe he had a couple residue trailers, although he may have scrapped them.

 

[maddawg308]

peecook - will give you a call first, since you are so close and I might be able to come down this weekend and pull parts.

doghead - you're second, if I can't get parts from Jason.

Thanks for the replies...

 

[jimbo*]

Not to hijack, but if anyone is parting an M200, I need either a mian leaf, or entire leaf spring.

Thanks, Jimbo

 

[pistonring]

Anybody on the East coast have a landing leg (or tongue jack) for a m-200a1 generator trailer? I need at least the gear box end with the crank handle. I don't need the step jack for the rear, I need the front jack that cranks up the hitch end. Let me know if you know of any available please. I drug this home today from fort meade and it is too heavy to not have a tongue jack. It held the deuce back on the beltway coming up the west side this afternoon. I had to use the 4 ways and convoy lights when I was under 40 MPH.
Thanks,
Dave in Elkton MD

 

[peecook]

Dave,

I have one that you can have if I can get it off the trailer, there's a little rust on it maddawg is coming down Sunday, so maybe between us we can figure a way to get it off.

Peecook

 

[Orionspath]

Anybody on the East coast have a landing leg (or tongue jack) for a m-200a1 generator trailer? I need at least the gear box end with the crank handle. I don't need the step jack for the rear, I need the front jack that cranks up the hitch end. Let me know if you know of any available please. I drug this home today from fort meade and it is too heavy to not have a tongue jack. It held the deuce back on the beltway coming up the west side this afternoon. I had to use the 4 ways and convoy lights when I was under 40 MPH.
Thanks,
Dave in Elkton MD

Dave I have two of them out at the farm in Luray. Mike I have a few parts from two chasis' I scraped last year. Sorry that I did scrap them though I have 1 complete chasis with single wheels in great olive green condition if anyone is interested in that for a hundred and three quarters or so......Send me a pm