chuck500cc
New member
- 310
- 2
- 0
- Location
- DFW Area
I need a tachometer cable for my M35 and some direction on how to change it out.
Chuck XD Fan
Chuck XD Fan
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Need M35 tach cable
- Thread starter chuck500cc
- Start date
jasonjc
Well-known member
- 5,326
- 290
- 83
- Location
- Gravette Ar.
There is one on epay right now seen it last night. It just screws on both ends like a speedo cable, asfar as I know.
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,132
- 113
- Location
- Athens, Ga.
I did mine when I did the head gaskets. I bought a new one from Saturn. First, I removed the old one by reaching under the dash with a wrench and unscrewing it from the back of the tach. Then I fed it out through the firewall. I then unscrewed it from the 90° gearbox adapter on the front of the timing cover.
Installation was the reverse.
Lube it with something like a dry graphite lube before installing.
Reaching the connector on the timing cover is fun. A shorty open end wrench is helpful, if you have one large enough. I did it from the driver's side.
Installation was the reverse.
Lube it with something like a dry graphite lube before installing.
Reaching the connector on the timing cover is fun. A shorty open end wrench is helpful, if you have one large enough. I did it from the driver's side.