Need MEP ceramic fuse cap

[ryax85]

Hello I've been searching for the past hour, can not find it. Where can I buy the ceramic convenience 12amp 250 volt fuse cap. I just need the cap, I guess someone needed ONE of mine . For what it's worth I have a 76' MEP 016c

thanks guys!

 

[ryax85]

I'm up for creative suggestions as well.

 

[Jimc]

Im not familiar with that specific gen set so i dont know the fuse you are speaking of but can you just replace the whole holder? The 002+3's have one for the dc charging system. Its just tue 1-1/4 glass fuse type. I just ordered a whole new holder from newark for a couple bucks.

 

[1800 Diesel]

Im not familiar with that specific gen set so i dont know the fuse you are speaking of but can you just replace the whole holder? The 002+3's have one for the dc charging system. Its just tue 1-1/4 glass fuse type. I just ordered a whole new holder from newark for a couple bucks.

He should post a photo of what it looks like....I suspect it's similar to the breaker for the convenience outlet on the MEP 2 & 4 but like you I'm not familiar with the model (MEP 016C) he's working....I have a fuse holder I could donate if it's the same as the MEP DC holder, but no spare AC breaker types...

 

[doghead]

Call Delk's

 

[doghead]

Found this with a simple google search for the NSN, after looking at the -24P TM.

http://www.parttarget.com/5920-00-892-9311_5920008929311_000-8007-407.html


There is even a picture of it.

Scroll down for dozen of manufacturers and their part numbers.

 

[1800 Diesel]

Hello I've been searching for the past hour, can not find it. Where can I buy the ceramic convenience 12amp 250 volt fuse cap. I just need the cap, I guess someone needed ONE of mine . For what it's worth I have a 76' MEP 016c

thanks guys!

I see a complete one on the big e--- site for $24...if you only need the cap I have a spare cap, but not the holder. Send me a pm.

 

[ryax85]

Sorry for the delay, I have been really busy lately. After reading your posts I said heck with it and bought 2 holders and 5 fuses all under 10$ (figured this was a military exclusive oddball part which was discontinued after it was made; but thanks to doghead I realized I was in luck) . I will post the outcome once I get this thing ready.