Sephirothq
Well-known member
- 1,423
- 26
- 48
- Location
- Trevorton / PA
While on the drive home the brakes on my M35A2 started to drag. The air pressure gauge was at 120 PSI. I didn't realize this until i stopped at and saw they were smoking. I couldn't get the brakes to release by pumping them. When i drained down the air tanks the brakes finally let go. For the rest of the trip i pulled off the air line to the wipes and had the air pressure controlled at 90 PSI. It seemed to be ok. What should i look for? Do i have too much air pressure? should i look for the air pressure relief? I had drained the tanks before i started so i don't think water is an issue. Let me know what you guys think.
thanks in advance.
dave
thanks in advance.
dave