• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

New Gama Goat Owner. Help! How do I connect the cargo section???

m1010plowboy

m1010plowboy

Well-known member
Steel Soldiers Supporter
3,903
2,697
83
Location
Edmonton, Canada
Let's drop an easy link to the Goat Manuals from the TM link above. https://www.steelsoldiers.com/threads/gamagoat-manuals.119161/

There are a lot of manuals so if we dig up a page number and some schematics of the attachment method it'll help future searchers working on the Goat.

I got to ride in this one and they are loud, fun machines. You must get that one rolling. This rusty looking Goat was painted up by the Movie industry and local MVPA SuperDave got some fame. Seems to me tires were an issue to find so if your tires are decent, treat them well.

Gama Goats don't rust like this one.

Gamagoat manuals

M561 LO 9-2320-242-12 Lubrication Order M561 LO 9-2320-242-12 Lubrication Order
www.steelsoldiers.com
 

Attachments

PhrogPilot

PhrogPilot

Member
22
26
13
Location
Pensacola, Fl
rtk said:
Looks like you have most of the major items , you need to remove that "TOW BAR" set up so you can see if anything has been cut/altered on the frame . Do you have all the hardware/pins etc. needed to reconnect ??? baby steps for sure .
Click to expand...
Sadly no hardware or Ujoint coupler...
Any ideas on where to get them?
 
PhrogPilot

PhrogPilot

Member
22
26
13
Location
Pensacola, Fl
SO it only connects at the bottom there the hitch is currently and at the driveshaft? (other than connecting the hoses, too...)

QUOTE="NDT, post: 2488737, member: 7671"]
Up top is for the truss kit, which allows you to rigidly connect the tractor and carrier, allowing the truck to operate with a missing wheel on the center axle. This is why no spare tire is provided on Goats.
[/QUOTE]
 
NDT

NDT

Well-known member
Steel Soldiers Supporter
10,420
6,458
113
Location
Camp Wood/LC, TX
PhrogPilot said:
SO it only connects at the bottom there the hitch is currently and at the driveshaft? (other than connecting the hoses, too...)

QUOTE="NDT, post: 2488737, member: 7671"]
Up top is for the truss kit, which allows you to rigidly connect the tractor and carrier, allowing the truck to operate with a missing wheel on the center axle. This is why no spare tire is provided on Goats.
Click to expand...
[/QUOTE]
There is also a steering drive shaft to be connected. Hopefully you have that somewhere in the pile of stuff in the carrier.
 
G744

G744

Well-known member
Steel Soldiers Supporter
1,706
3,817
113
Location
Hidden Valley, Az
As built, the Goat had a special aluminum alloy Detroit 3-53 engine, rather than usual cast iron. This enabled the weight balance from fore to aft necessary in swimming.

That engine was unfortunately prone to cylinder liner fretting, allowing coolant to leak into the oil pan.

In later years, it was replaced with by an iron block engine and swimming was ordered ceased.
 
Gamagoat1

Gamagoat1

Active member
746
44
28
Location
Kiowa, Colorado
G744 said:
As built, the Goat had a special aluminum alloy Detroit 3-53 engine, rather than usual cast iron. This enabled the weight balance from fore to aft necessary in swimming.

That engine was unfortunately prone to cylinder liner fretting, allowing coolant to leak into the oil pan.

In later years, it was replaced with by an iron block engine and swimming was ordered ceased.
Click to expand...
BS>>> The Iron block is not the same size. It was never replaced with an iron block 353!!!
 
kendelrio

kendelrio

Well-known member
Steel Soldiers Supporter
2,677
8,646
113
Location
Alexandria, La
Gamagoat1 said:
BS>>> The Iron block is not the same size. It was never replaced with an iron block 353!!!
Click to expand...
What's interesting in THIS thread you explained how to tell the difference between an aluminum block and iron block in the Detroit 353.

So... did they come with an aluminum block or not? You seem pretty sure that they did in the other thread and didn't in this thread...
 
Gamagoat1

Gamagoat1

Active member
746
44
28
Location
Kiowa, Colorado
kendelrio said:
What's interesting in THIS thread you explained how to tell the difference between an aluminum block and iron block in the Detroit 353.

So... did they come with an aluminum block or not? You seem pretty sure that they did in the other thread and didn't in this thread...
Click to expand...
They were designed in this configuration, with an aluminum block , 3 cylinder Detroit Diesel featuring 53 cubic inches per cylinder. The 3-53 Detroit was a two stroke engine that could produce 101 horsepower and 217 lb-ft of torque.The original pilot design had an aircooled corvair engine.
 
Last edited:
J

joel

Member
80
9
8
Location
sioux falls,sd
PhrogPilot said:
Hello All,
I feel blessed to be the new caretaker of a very nice, fully operational Gama Goat (well, sort of fully operational...). The previous owner did not have the ability to transport the Goat to parades, etc so he fabricated a system to pull the Cab with his Deuce and a half and the cargo section with a one ton truck. Well, I purchased it in two pieces and would like to reconnect them. Where do I start and what do I need???

Thanks!

Kenny
Capt USMC (ret)
Click to expand...
Is it still apart?I know of a guy who ia a goat guy( M3A1)? I'll get back to you if my memory is not right.
 
You must log in or register to reply here.
110,683members
165,179threads
2,324,247posts
1,103online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks