grmorrow04
New member
- 6
- 8
- 3
- Location
- Charlotte, NC
I guess that’s what’s missing here?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
New guy in NC, M1123 needs some love
- Thread starter grmorrow04
- Start date
I guess that’s what’s missing here?
RJTM998
Well-known member
- 178
- 373
- 63
- Location
- North Carolina
Have you taken the air filter out? Looks like engine has sat out uncovered, and robbed of parts. See if you can figure out if there is water in the air filter housing, etc. Mind us asking what he paid for the truck? It can get to the point of no return with what it will cost to get a truck up and running not counting cosmetics like, tops, doors, seats, etc.
- 6,891
- 9,550
- 113
- Location
- Papalote, TX
YES and that tube with the arrow goes DIRECTLY into the intake, some water, nut, washer, just about anything will trash the engine.
- 6,891
- 9,550
- 113
- Location
- Papalote, TX
I would certainly look for a good takeout GEP engine before I would pony up the big bucks for a Melton which could very well be just a rebuilt GM engine.
Last edited:
- 3,569
- 3,475
- 113
- Location
- Brooklyn, NY
Please search others’ experiences and statements about Melton prior to purchasing anything from them (or any other vendor).
I am neither endorsing or criticizing them. I’m only saying read the reviews.
I am neither endorsing or criticizing them. I’m only saying read the reviews.
- 493
- 704
- 93
- Location
- Fort Lauderdale, Florida USA
....it can also be a wrong connection to the starter/batteries and spinning the starter on 12V
grmorrow04
New member
- 6
- 8
- 3
- Location
- Charlotte, NC
Update - I pulled the starter out, and it's definitely bad. The teeth on the bendix are all chewed up.
I read somewhere on here from a gentleman that's been working on these for 25 years that there should be two shims at the starter - this one only had one thin one. I'm thinking that was what chewed up the bendix.
I also put my multimeter to the glow plugs and the start box - neither of which are good.
I've relayed this information to my nephew, so now the ball is in his court as far as what he wants to do with the truck.
I read somewhere on here from a gentleman that's been working on these for 25 years that there should be two shims at the starter - this one only had one thin one. I'm thinking that was what chewed up the bendix.
I also put my multimeter to the glow plugs and the start box - neither of which are good.
I've relayed this information to my nephew, so now the ball is in his court as far as what he wants to do with the truck.
- 3,569
- 3,475
- 113
- Location
- Brooklyn, NY
These are all simple issues
grmorrow04
New member
- 6
- 8
- 3
- Location
- Charlotte, NC
Simple yes. Not sure where his cutoff for spending on repairs will be.
Other issues I've noticed (some already mentioned):
Radiator is leaking where the tank meets the cooing channels
Noticed a coolant drip from the passenger side footwell area (are there heater cores in these?)
Brake master cylinder is missing
Gauges are all missing
CDR valve is missing
Headlights missings
Needs proper alternator (200amp)
Needs alternator pulley
Needs serpentine belt
Needs proper size batteries (the two that came with it are too big to fit in the battery area)
Other issues I've noticed (some already mentioned):
Radiator is leaking where the tank meets the cooing channels
Noticed a coolant drip from the passenger side footwell area (are there heater cores in these?)
Brake master cylinder is missing
Gauges are all missing
CDR valve is missing
Headlights missings
Needs proper alternator (200amp)
Needs alternator pulley
Needs serpentine belt
Needs proper size batteries (the two that came with it are too big to fit in the battery area)