New member, just got my EUC approved and headed out to pick up my M998A1 this weekend

[Presale]

Hey guys
I'm new on here. How do you add a photo to a post?

 

[Wire Fox]

Hey guys
I'm new on here. How do you add a photo to a post?

It's in the FAQ's: http://www.steelsoldiers.com/faq.php?faq=vb3_reading_posting#faq_vb3_attachments Basically, you have to be in the "Advanced" mode instead of just a quick reply. (While I'm writing this post, I see a "Go Advanced" button that takes me to a more sophisticated post editor.) It's pretty intuitive once you see the options.

 

[juanprado]

Just a footnote:

RRAD will not allow starting fluid, propane or any flammable through security. Just a fyi, as I saw a trucker being detained with the whole rig undergoing intense secondary screening because of propane cyl for cooking stove.

 

[04sshd]

Where is your HUMVEE @ ?

Sent from my SM-G955U using Tapatalk

Texas (San Antonio area)

 

[04sshd]

Good info, thanks! Mine is actually at a storage lot off base so that takes some of the hassle out. I made it to San Antonio but my tow rig had issues on the trip so I'm at a shop having them sorted out. I hope to have the HMMWV loaded up first thing in the AM!

 

[Stonewall]

Just a footnote:

RRAD will not allow starting fluid, propane or any flammable through security. Just a fyi, as I saw a trucker being detained with the whole rig undergoing intense secondary screening because of propane cyl for cooking stove.

Do NOT use starting fluid on a HMMWV. Good luck.

 

[04sshd]

Loaded and headed home

 

[someoldmoose]

Hope you have a safe trip.

 

[Scar59]

Loaded and headed homeView attachment 678679

So far, so god, did it start? Also that should be chained. Those strap wont hold if something goes south...

 

[04sshd]

So far, so god, did it start? Also that should be chained. Those strap wont hold if something goes south...

It started right up, drove it in the lot, forklifts on the trailer. I agree, chains are better but I don't own any binders and the trailer isn't setup for it. I've hauled tons of cars across the US with this setup. 4 straps pulling down forward and backwards. Then two on the front tires to keep it from getting air on bumps. Not perfect, but it works.

 

[Tracer]

I hope the forklift didn't damage anything.

 

[Awol]

It started right up, drove it in the lot, forklifts on the trailer. I agree, chains are better but I don't own any binders and the trailer isn't setup for it. I've hauled tons of cars across the US with this setup. 4 straps pulling down forward and backwards. Then two on the front tires to keep it from getting air on bumps. Not perfect, but it works.

I'd say its fine. I've hauled plenty of cars with the same setup.

Looks like a nice truck!

 

[04sshd]

I hope the forklift didn't damage anything.

It actually prevented damage to my trailer. The m998 is 2 inches too wide to fit between my trailer fenders.

 

[Tracer]

They forklifted my Deuce, and dented the oil pan, bent the right front leaf spring, and bent the battery box supports. When we got home I realized the battery box door was rubbing on the cab. But 04sshd, it looks like you done good. I'm contemplating a M998 for my self. I like the auto trans so my wife can drive. Have a safe trip home.

 

[Bravojmc]

They forklifted my Deuce, and dented the oil pan, bent the right front leaf spring, and bent the battery box supports. When we got home I realized the battery box door was rubbing on the cab. But 04sshd, it looks like you done good. I'm contemplating a M998 for my self. I like the auto trans so my wife can drive. Have a safe trip home.

Yep the guy at fort Riley wanted to fork lift my Hmmwv onto the trailer and I said na I'll just drive it up thanks

 

[Tracer]

Yep the guy at fort Riley wanted to fork lift my Hmmwv onto the trailer and I said na I'll just drive it up thanks

Good move Bravojmc. I've seen more damage on vehicles & equipment done with forklifts than anything else. I've seen S-280 & S-250 shelters on GL that are in great condition except for the forklift blade damage.........a shame.

 

[04sshd]

Finally made it home and off loaded the M998, thanks guys for all the thoughts, encouragement, and tips!

 

[gtodan]

Good job. Now for desert paint?

Finally made it home and off loaded the M998, thanks guys for all the thoughts, encouragement, and tips!

View attachment 678957

 

[04sshd]

Good job. Now for desert paint?

Probably gonna squirt some black on it and make it look like a civilian h1 to try to not piss the neighbors off

 

[Bravojmc]

I say its your truck! Eef the neighbors!