weld88
New member
- 44
- 0
- 0
- Location
- Asheville NC
Whhheewww, finally got the new seats in the deuce!! Seats are from a 02 dodge Durango rear seat these fit in nicely. I had to fab up some custom seat risers for the correct height and angle of seats. Next on the list is dynamat and carper the inside for a quite ride lol..
If anyone else is considering doing a seat swap in there deuce there are a few obstacles to watch for.
1. Master cylinder door clearence.
2. Shifter clearence
3. Hi/low shifter clearence.
4. Seat bolt pattern
5. Keep in mind new seats may push you closer ro steering wheel.
Basically measure and then measure again and then....measure again lol...
![20140104_204044.jpg 20140104_204044.jpg](https://www.steelsoldiers.com/data/attachments/321/321393-0a63b0a23d593399283651e4180bf0ed.jpg)
![20140104_204028.jpg 20140104_204028.jpg](https://www.steelsoldiers.com/data/attachments/321/321394-27f17646565a0b6fa789817651080d11.jpg)
![20140104_203344.jpg 20140104_203344.jpg](https://www.steelsoldiers.com/data/attachments/321/321395-065fd26bdb8015e09d67a115edb545a3.jpg)
If anyone else is considering doing a seat swap in there deuce there are a few obstacles to watch for.
1. Master cylinder door clearence.
2. Shifter clearence
3. Hi/low shifter clearence.
4. Seat bolt pattern
5. Keep in mind new seats may push you closer ro steering wheel.
Basically measure and then measure again and then....measure again lol...
![20140104_204044.jpg 20140104_204044.jpg](https://www.steelsoldiers.com/data/attachments/321/321393-0a63b0a23d593399283651e4180bf0ed.jpg)
![20140104_204028.jpg 20140104_204028.jpg](https://www.steelsoldiers.com/data/attachments/321/321394-27f17646565a0b6fa789817651080d11.jpg)
![20140104_203344.jpg 20140104_203344.jpg](https://www.steelsoldiers.com/data/attachments/321/321395-065fd26bdb8015e09d67a115edb545a3.jpg)
Attachments
-
53.7 KB Views: 145