• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

New to forum

Larry_R

New member
34
0
0
Hello everyone!!
New to the site and I'm looking forward to meeting everyone.

On 11/02/04 I purchased a M882 from a GSA auction. I had been wanting one for a long, long time. I had been doing alot of research on these vehicles and since I'm a MOPAR guy anyway it was just a shoe in for me.

The one I purchased ($275) is in really good shape, but needs a few things here and there. After the auction, I went a bought a battery, put it in and she started right up and ran like a top. I got in and drove her to the nearest gas station (about 1/2 mile) and there was a big vibration. I thought "oh great" what did I buy??

At the gas station I crawled under her and found that when the Government had loaded or unloaded her. They had used a forklift and one of the forks had bent the rear drivline. A friend who buy's all the time from these GSA auctions said that it's common for this to happen. So I pulled the rear driveline and drove it home on the front one (about 100 miles).

Everything works on her but the turnsignals, and I haven't had the time to look at why yet. Even the blackout lights work.

A fire department had it for a while and painted it red, so i'll have to repaint it in the spring.

I have a few questions. Where can I find some literature on these trucks?? Is there a layout pattern available for the camouflage scheme?? And how about paint brands and codes?? Also how about a description of the M880 series and what the M numbers mean (M880, M881, M882, M883, etc). I know the M882's were communications vehicles, but I would like to know what the whole series means.

Again, looking forward to meeting everyone.<img src="emoticons/icon_smile_approve.gif" alt="Approve">
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
<font color="green">[3]<font face="Comic Sans MS">Greetings Larry R. Welcome to the forum. Before I get into your questions I need to ask you to put a location in your signature. It's a benefit for all that read it and we kinda get an idea where everybody is. Congrats on the M882. It's a fine truck and about the least expensive way to get into the hobby. You can start with a company called Military Media. They have all the TMs (technical manuals) for your truck on a CD in PDF format. I would also start checking Ebay and some of the literature sites for hard copies of the manuals. These manuals will have a detailed description of the M numbers as well as NSN numbers for all of them. As far as paint you have several sources. I like Gillespie paints. Couple of good sources are Military Markings in the NH I think and Rapco in TX. A quick search should land you the website. I would also start doing some GOOGLE searches on the M880 M882 and so forth. Lots of info out there on these. It's mostly civilian with the exception of the blackout lighting system and the seperate (electrically) 28 volt systems. I've got one and it's a handy vehicle. Again welcome and keep searching the archives, we've already discussed a bunch.</font id="Comic Sans MS">[/3]</font id="green">
 

McGuyver

Member
466
7
18
Location
Utah
Hello Larry,

I'm a real mopar nut myself so I love these trucks for the same reason.

Here's a site that lists descriptions of the variants on the series:

http://www.jedsite.info/transport/charlie/cucv_series/cucv-series.html

Also check out this page for a free copy of the NATO three collor pattern for the M880:

http://www.olive-drab.com/od_mvg_camo.php3

Personally I like the old 4 color pattern better, and I have learned that it was exactly the same four color used on the M880's as was used on the M715's, so if you want, you could use the M715 pattern for that four color scheme.

BTW, you can also check out my web site listed below for much of this info. Good luck!
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
Thats hillarious! I just clicked over on the jedsite page and checked out the M887. Low & behold that's what it is and it belongs to a friend, Rick Theirs. Then I decided to check out the M888 telephone maint truck. Clicked the pic open and just stared at it. Dang, that truck looks familiar. Its a pic of MY M887! Not an M888 at all! Too funny! Now everybody can see what my M887 looks like!
 

Bob H

Well-known member
Steel Soldiers Supporter
3,142
161
63
Location
Huron National Forest, Michigan USA
Sweet Deal!
They go for more than that for a parts truck near me <img src="emoticons/icon_smilie_bitchin.gif" alt="Bitchin">.

Clowns on high lows <img src="emoticons/icon_smile_disapprove.gif" alt="Disapprove">

You may have noticed Saturn Surplus ( site sponsor.)
Here is their M880 page
http://www.saturnsurplus.com/newpage11.htm
Also check out
http://www.swapmeetdave.com/MVBack.htm
#79-MAY/JUN 2000: Dodge M880/M890 Trucks (11 pages)
This is a must have magazine!!!!!!!!!
Heck now that I think of it
I'm gonna order a spare one<img src="emoticons/icon_smile_idea.gif" alt="Idea">
 

Todd Haley

Member
155
0
16
Location
Crittenden, Ky.
<font color="blue">Hey Bob! Got any close up pics of your 44 GPW's data plate? Did you find the hood number?<img src="emoticons/icon_smile_thumzup.gif" alt="Thumb Up"></font id="blue">
 

Larry_R

New member
34
0
0
Thanks for all the info. Looks like the camo repainting is going to be time consuming. However, I think it will look much better than the fire engine red it is now.

As far as the sale went. There were 15 of the M880 variants there. The highest one went for $1200 and it was near perfect. It had been repainted and had new tires, exhaust, and shocks. It had around 75,000 miles on it. Another one went for $1000, and it was almost as nice as the one mentioned above. The one I wanted the most was a M880 still in original camo. It had not been sent to a Fire Department, and was straight as a pin. It went for $800. The other 12 went for under $350. <img src="emoticons/icon_smile_approve.gif" alt="Approve">
 

McGuyver

Member
466
7
18
Location
Utah
You know I was checking out some of those CUCV M1008's in their "Archives" section, and I have to say, I really like the 34094 "383" green. I like it a lot better than the 34079 that was originally used in the four color pattern on the M880's. When I redo the camo on my M880, I'm thinking of using a 34094 green in place of the 34079. I know it's not quite original, but it looks real sharp. BTW, I found out recently that as far as the 383 green (34094) goes, there are two mixes: one from 1987, and a more recent one from 2000. Anyone here ever heard about this?
 

McGuyver

Member
466
7
18
Location
Utah
Hey Bob H,
you got any more side shots of your M882 you could post here? I'd like to get a better look at your "Winter US & Europe - verdant" camo pattern.
 

Bruiser

New member
14
0
0
Welcome to the site Larry R. Post some pics up if you can so we can get a before and after pic!<img src="emoticons/icon_smile_approve.gif" alt="Approve">
 

Bob H

Well-known member
Steel Soldiers Supporter
3,142
161
63
Location
Huron National Forest, Michigan USA
I did not think of this pattern as a winter pattern????????

If my memory serves me right, our sister battalion 5th Battalion 10th Marines, 8" self propelled artillery unit had winter or snow camo that had white, tan, green & little black, my battalion had woodland camo.

<img src="data/Bob H/2004111219745_IM000378a.JPG" border="0">
 

McGuyver

Member
466
7
18
Location
Utah
Hi Bob,

Thanks for posting that picture. Check out this link for more info on the four color camo patterns:

http://www.olive-drab.com/od_mvg_camo.php3

You're probably thinking of the "Snow - temperate w/trees & shrubs" configuration. It has Forest Green, White, Sand, and Black. The "Winter US & Europe - verdant" configuration has no white in it, but field drab instead.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks