Uberlandwerks
New member
- 22
- 0
- 0
- Location
- Montana
From Billings MT, New here and to owning a LMTV. 94' Stewart. Looking for more info and this seems to be the only place to get it.
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
New with 1994 LMTV
- Thread starter Uberlandwerks
- Start date
- 1,010
- 4
- 38
- Location
- Annapolis MD
Hello from MD.
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
Welcome from Florida & now you found a place with tremendous amounts of info that you seek. There are a lot of guys here that are quite knowledgeable & don't mind helping with problems that show up!
Flyingvan911
Well-known member
- 4,709
- 158
- 63
- Location
- Kansas City, MO
Welcome from Kansas City, MO. I've flown into Billings before to drive over to Glendive. Pretty country up there.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
Welcome to the Mad House.
snowtrac nome
Well-known member
- 1,674
- 139
- 63
- Location
- western alaska
welcome from western Alaska I too am another lmtv owner
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Welcome from S Central TX. Stay warm. Hopefully you're back on the road again.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
Also got to its Craigslist ad but via Expedition Portal website. Nice rig. This is the best place to get info maintaining/updating the M1078 it is based on. Expedition Portal website is the best place for info the finish of outfitting it as an Expedition Rig. What is your goals for its use?
Last edited:
- 53
- 0
- 0
- Location
- Woodbridge, Virginia
Welcome from Virginia!
I'm curious about the box on the rear... Is that original to the truck or something purpose built by another owner? And what happened to the spare tire, APHU, and air intake?
Just curious...
Cheers!
I'm curious about the box on the rear... Is that original to the truck or something purpose built by another owner? And what happened to the spare tire, APHU, and air intake?
Just curious...
Cheers!
Uberlandwerks
New member
- 22
- 0
- 0
- Location
- Montana
It is a custom box build. 3" fiber box. The hydro controls and air filter were all relocated and a kick out in side the box was made to accommodate. There was no spare tire with the truck. There will be a mount and winch installed on the rear of the truck for a spare wheel. I will post pictures as the build progress.
Uberlandwerks
New member
- 22
- 0
- 0
- Location
- Montana
What are some of the updates you would recommend? Thanks!
Uberlandwerks
New member
- 22
- 0
- 0
- Location
- Montana
What are some of the updates you'd recommend?
Thanks!
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
We need more info on what has been done already to answer that question.
Bobcat701
New member
- 92
- 1
- 0
- Location
- Autryville, NC
My Wife is from Glendive MT. We reside now in NC, cheers.
- 1,172
- 24
- 38
- Location
- Clifton, TN
Maybe you could post a bunch of pictures of the truck and it's systems (especially where modified) so we can get an idea of what to recommend for additional updates and improvements.
Here are a few questions for thought:
CTIS working?
Has extra fuel tank capacity been added?
Has seating in the cab been upgraded?
Has the cab been insulated or sound proofed?
Backup camera?
Lights and lighting improvements?
Pictures are always helpful!
Here are a few questions for thought:
CTIS working?
Has extra fuel tank capacity been added?
Has seating in the cab been upgraded?
Has the cab been insulated or sound proofed?
Backup camera?
Lights and lighting improvements?
Pictures are always helpful!
- 2,308
- 893
- 113
- Location
- Fargo ND
Welcome to the site from ND, that is very fine looking truck you picked up, I dont know if the box is original or not but it sure looks good! Good luck and have fun!
KK
KK