GoFastCrackPipe
New member
- 33
- 0
- 0
- Location
- Portland, Or area
I tried to search for the issue that I'm having (has already helped me with a few other things) but I didn't see anything like the problem I'm having.
The problem : My tail lights work fine, but only the passenger side break light works. The turn signals also work fine. I've found a couple of wiring diagrams through my searching, but I can't make out the wire numbers so I'm not sure what circuits I should be looking at. One thing I did notice is that it looks like the break light and turn signal are powered by the same circuit in the diagram I have... is this correct?
Before I go blindly chasing wires I thought I'd post up here and see if anyone had any suggestions as to where I should start looking.
Thanks!
By the way, this site has a TON of info... I'm glad I found it!
Oh yea... I should probably have stated that this is on a 1970 M35A2.
The problem : My tail lights work fine, but only the passenger side break light works. The turn signals also work fine. I've found a couple of wiring diagrams through my searching, but I can't make out the wire numbers so I'm not sure what circuits I should be looking at. One thing I did notice is that it looks like the break light and turn signal are powered by the same circuit in the diagram I have... is this correct?
Before I go blindly chasing wires I thought I'd post up here and see if anyone had any suggestions as to where I should start looking.
Thanks!
By the way, this site has a TON of info... I'm glad I found it!
Oh yea... I should probably have stated that this is on a 1970 M35A2.