No NAPA Fuel Filter Gaskets

[Divemaster920]

Called local NAPA and they said only 1 in the USA and it is in FL, I am in VA. Called headquaters....none in stock.
HUUMMMMMMMMMMMM?
Doesn't look good.

 

[doghead]

Which gasket and NAPA part number?


I'd guess, Napa does not manufacture the gasket. Did you ask who is the part manufacturer? Wix is my guess. Other manufacturers must make it also. Just need to dig deeper, I bet.

 

[poppop]

John Deere part number M96T. My dealer has them in stock usually. Carquest 90406, Big A 97221 or 97406, Baldwin G-241 or G-107. This is from the chart here on site.

 

[ctmustang]

not sure of the napa part# offhand but I just bought 4 at my local napa for my penn. recovery nextweek. You can find it here.

 

[Recovry4x4]

Primary or secondary filter? Bolt or can gasket? Need more info to help you.

 

[emr]

Just had to say on cardboard hanging in the shop trailer in the unit here, it says, NAPA........N...NO...A...ARMY...P...PARTS...A...AVAILABLE The title made me remember it...LOL....

 

[Divemaster920]

The gaskets I am talking about are the 5070's.
Right now I have some orings on the way.

 

[Recovry4x4]

Instead of buying the 3512 filters, try the 3540s. They supposedly, have the right gasket. My next filter order will include these and I can report on it then.

 

[jasonjc]

I just looked at the Wix web site the 33512 and 33540 come with the same gaskets. But the 33512 is a 10 micron and the 33540 is a 6 micron.

 

[jatonka]

I have all the filter gaskets all the time, the shipping won't kill you. PM when you need them

 

[Recovry4x4]

6 micron is good!

 

[cranetruck]

6 micron is good!

Yes, considering that the stock filters (053161-04) are rated 5 micron nominal.
Torque screws to 23-27 ft-lb.