• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

NO START without ETHER !!!???

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,501
113
Location
Interlachen Fl.
Tomorrow, I will increase the main fuel. James what would have changed to require the increse?
I would be guessing but head going bad. By increasing the main fuel I'm hopeing it will close down the control coller some and make more pressure and help in starting. If this works you can then back down the main fuel nuts to where it will start easer and but not be high enough to melt stuff . You will be fine just mark the inter nut with marker and count rotation.

Call me if needed 352-262-0398
 
Last edited:

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,501
113
Location
Interlachen Fl.
Increasing the fuel did not help as Tim pm me. From here I might read tm troubleshooting the 465 and go step by step. Tim if you need parts I might have what you need. I'm bad about getting the parts out but I'm here.
Need to check all pressures from intank to full rpm numbers.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks