NP 200 rebuild HELP!!!

[4x4builder1]

Just getting started on my T case rebuild and I cant find any manuals or guides Its a np200 and I just ordered my input shaft (memphis equipment $105) and master rebuild (cobratransmission.com $210) but im not going to tear into it untill I have something to go by or know that I can handle it. Is there anything that would need to be shimmed like a rear end or is it pretty cut and dry? Thanks for your help guys very appreciated

 

[Bill W]

TM 9-8031-2 (M-37 Power Train,Body & Frame)

 

[bkaus]

My first post on any web site. Just wante to let you know I found some info on the NP200 at AutoZone.com/Repair info/Chrysler Full-Size. I can't seem to find it back, but I'm no wiz at this computer stuff. Good luck on your trans case re-build.

 

[mgieselman]

NP 200 rebuild...

Did you start your rebuild?

Was the rebuild kit you ordered complete?

 

[4x4builder1]

Not just yet had an issue with the shaft from memphis equipment took some time but got the right one. So far just cleaned it up sent the gears out to houston coatings for anti-friction coating and painted the housing. The kit does seem complete.