NSN 2590-00-043-4241 Winch ?

[SandBar]

Can anyone confirm the identity of a winch with NSN 2590-00-043-4241 to see if it would be compatible with a M51a2 ? Seems to be 20k capable, and has a speed reducer bolted on to make it 40k.

 

[NDT]

i wouldn't buy that for a 5 ton. The worm shaft probably won't have the proper machining to receive the winch driveshaft.

 

[simp5782]

Can anyone confirm the identity of a winch with NSN 2590-00-043-4241 to see if it would be compatible with a M51a2 ? Seems to be 20k capable, and has a speed reducer bolted on to make it 40k.

Do you have the dual output PTO? Otherwise the winch won't do you any good cause you can only run the bed off the rear facing PTO

You also need frame extensions

Rear output PTO?

The neighbor stopped by today while I was working on my M35A2 wo/w. He is a farmer and rancher, and brought up the idea of putting a feeder on the back of a deuce and asked about PTOs on them. Currently, he powers a feeder wagon on a trailer with a tractor's PTO. I don't know much about it, I am...

www.steelsoldiers.com

 

[Recovry4x4]

The M51A2 uses the PTO accessory drive for the bed so a front facing PTO is present.