goldneagle
Well-known member
- 4,492
- 983
- 113
- Location
- Slidell, LA
I have complete dash panels from the M939 trucks both A1 and A2 trucks. $125 each plus the ride or with juanprado to the rally.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Official 2015 Ga. Rally buy/sell/trade thread
- Thread starter clinto
- Start date
- Status
- 12,195
- 320
- 0
- Location
- gainesville, ga.
SWISS and 73m819 want and committed list
SWISS -- Need an 800 series steering column. Found one
SWISS -- Trade or Buy Looking for 11 G177 tires, can trade 7 good 14x20's, 3 are new.
73m819 -- I am looking for 4 of the cab outside grab hand holds, these are mounted on the tub just before or right at the rear corner curve of the tub
Rmtaunton -- Snatch block for 5 ton, We have MORE then 1, talk to swiss
swiss -- Joe put swiss down for a set please (pole set)
73m819 -- Put 73m819 down for a set, thanks (pole set)
73m819 -- Looking to buy or trade for TWO clear lenses for the single light armored head lights. Will swap a pair of ir lenses for clear if someone is looking for the ir lenses.
73m819 -- Sorta looking for TWO 939 a0/a1 fuel tanks NOT a2 or tractor, or the small wrecker tank.
73m819 -- Someone buys this truck, talk to me about driving it to where it needs to go.(Sandcobras truck)
73m819 -- will take 3 81mm brown
swiss -- Another 81 brown please And 2 60
swiss -- Looking for some Jameson Florescent lights not at e-bay pricing. PM me if you have some to sell. (do not know if this has been found ???)
73m819 -- Twight, I have 3 specter fuel cans at you place (i think) that I brought from Carnac, could you PLEASE bring them to the rally, thank you. (dealt with)Thank You
73m819 -- I WILL take it (939 air drier) if joe does not. ALSO looking for a 939 foot brake treadle valve
Andyrv6av8r -- I think I have 2 driers Ron.
sandcobra164 -- Ron, I have a M939 series treadle valve with pedal, new never used. I'll confirm tomorrow, gotta dig through my parts bin.
73m819 -- I sure would like 4 PSP sections
73m819 -- Adam, I could use a metal air gauge, NOT one of those crap plastic ones.
73m819 -- looking for A 809 series front winch drive shaft.
73m819 -- looking for 200' of 5/8" NEW winch cable
73m819 -- Looking for 2 or 3 G177x20s, on or off rim
73m819 -- Looking for a METAL water temp. gauge and sending unit as a set
I think this is ALL, I hope, as it is NOW, I am going to need to acquirer a BIG trailer just to haul ALL our acquired goodies back to the AO and the FOB.
SWISS -- Need an 800 series steering column. Found one
SWISS -- Trade or Buy Looking for 11 G177 tires, can trade 7 good 14x20's, 3 are new.
73m819 -- I am looking for 4 of the cab outside grab hand holds, these are mounted on the tub just before or right at the rear corner curve of the tub
Rmtaunton -- Snatch block for 5 ton, We have MORE then 1, talk to swiss
swiss -- Joe put swiss down for a set please (pole set)
73m819 -- Put 73m819 down for a set, thanks (pole set)
73m819 -- Looking to buy or trade for TWO clear lenses for the single light armored head lights. Will swap a pair of ir lenses for clear if someone is looking for the ir lenses.
73m819 -- Sorta looking for TWO 939 a0/a1 fuel tanks NOT a2 or tractor, or the small wrecker tank.
73m819 -- Someone buys this truck, talk to me about driving it to where it needs to go.(Sandcobras truck)
73m819 -- will take 3 81mm brown
swiss -- Another 81 brown please And 2 60
swiss -- Looking for some Jameson Florescent lights not at e-bay pricing. PM me if you have some to sell. (do not know if this has been found ???)
73m819 -- Twight, I have 3 specter fuel cans at you place (i think) that I brought from Carnac, could you PLEASE bring them to the rally, thank you. (dealt with)Thank You
73m819 -- I WILL take it (939 air drier) if joe does not. ALSO looking for a 939 foot brake treadle valve
Andyrv6av8r -- I think I have 2 driers Ron.
sandcobra164 -- Ron, I have a M939 series treadle valve with pedal, new never used. I'll confirm tomorrow, gotta dig through my parts bin.
73m819 -- I sure would like 4 PSP sections
73m819 -- Adam, I could use a metal air gauge, NOT one of those crap plastic ones.
73m819 -- looking for A 809 series front winch drive shaft.
73m819 -- looking for 200' of 5/8" NEW winch cable
73m819 -- Looking for 2 or 3 G177x20s, on or off rim
73m819 -- Looking for a METAL water temp. gauge and sending unit as a set
I think this is ALL, I hope, as it is NOW, I am going to need to acquirer a BIG trailer just to haul ALL our acquired goodies back to the AO and the FOB.
Last edited:
- 14,635
- 4,795
- 113
- Location
- Buchanan, GA
Would anyone be interested in a set of 5 ton rear axles with lockers?
- 1,629
- 724
- 113
- Location
- Central NY
I have one ground spade for an 818 tractor or M543/M816/M936 wreckers...... $80
RAYZER
Well-known member
- 3,380
- 59
- 48
- Location
- sanford/florida
Really looking forward to this year's GR!
I'm in need of a good clean fuel tank for my m246, I believe this is the same tank that fits an m813, m819, m820 and some others I'm sure.
I'm in need of a good clean fuel tank for my m246, I believe this is the same tank that fits an m813, m819, m820 and some others I'm sure.
andy3
Member
- 614
- 12
- 18
- Location
- Suwanee, Ga
I will have 10-20 lbs of rare earth hard drive magnets. Be sure to stop by and pick up some. They are great for the bottom of the oil pan, pumpkins, or making speciality brackets. You can use them and your settle tanks if you process your own fuel.
I use them to anchor banners & signs.
I use them to anchor banners & signs.
Whiterabbit
Member
- 744
- 14
- 18
- Location
- Bristol Va.
Not vehicle related but I'm looking for a German/East German mess kit and a like new US shelter half.
Thanks,
Thanks,
Streamline
Active member
- 544
- 107
- 43
- Location
- Comer, Ga.
This Tent has SOLD
Well looks like im going to be selling my Personal Shop Tent. So Anyone looking for a Large Tax Free Storage or Shop area Here ya go!
This is a TAN 48ft Temper Tent With Floor and Fly's. The Tent is in Fair to Good Shape. One section is a Tropical Section with the over head window and the screen has separated from the cloth on lower end but there is a fly over it so it just mad it more cooler in the tent during the summer. Can Be fixed. All Issues with Tent Cloth can be fixed! The Frame is in Good Shape.
Asking $2500 for all 48ft with Floor Cloth, 3 Flys, 2 End walls, 6 Mid Sections, and Complete Frame! >>>SOLD>>>>>>> SOLD >>>>>>>SOLD>>>>>>>
Can Have it ready to be picked up at Rally! I will take more detailed pictures of the issues with cloth and send them to prospected buyers this way no surprises.
Thanks Bobby Deposit Required to Deliver to Rally.
P...S....>>> I also Have a TAN 18x36 ft MGPTS that I have set up that need a good cleaning but still in good shape asking $900 for it. Will get pictures soon.
Well looks like im going to be selling my Personal Shop Tent. So Anyone looking for a Large Tax Free Storage or Shop area Here ya go!
This is a TAN 48ft Temper Tent With Floor and Fly's. The Tent is in Fair to Good Shape. One section is a Tropical Section with the over head window and the screen has separated from the cloth on lower end but there is a fly over it so it just mad it more cooler in the tent during the summer. Can Be fixed. All Issues with Tent Cloth can be fixed! The Frame is in Good Shape.
Asking $2500 for all 48ft with Floor Cloth, 3 Flys, 2 End walls, 6 Mid Sections, and Complete Frame! >>>SOLD>>>>>>> SOLD >>>>>>>SOLD>>>>>>>
Can Have it ready to be picked up at Rally! I will take more detailed pictures of the issues with cloth and send them to prospected buyers this way no surprises.
Thanks Bobby Deposit Required to Deliver to Rally.
P...S....>>> I also Have a TAN 18x36 ft MGPTS that I have set up that need a good cleaning but still in good shape asking $900 for it. Will get pictures soon.
Attachments
Last edited:
- 1,200
- 457
- 83
- Location
- Spartanburg,SC
Anyone have a pair of 939 series A2 bumperettes for a good price?
- 7,409
- 2,501
- 113
- Location
- Interlachen Fl.
Ron say please and I will bring you the 4 grab handles off the cab.
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
Anybody have a passenger door and passenger fender for a Unimog Freightliner SEE I need one and would like to pickup at rally.
joeM62
Member
- 551
- 1
- 18
- Location
- Cedartown/GA.
Hit Twright up he has 2 of them
rebelqwes87
New member
- 179
- 0
- 0
- Location
- Loganville, Ga
Still looking for an interior door handle on a 939 series truck
- 12,195
- 320
- 0
- Location
- gainesville, ga.
please
- 7,409
- 2,501
- 113
- Location
- Interlachen Fl.
OK Ron you got them.
Also have Teledyne 4A032-4 still on the pallet. $400.00
Also have Teledyne 4A032-4 still on the pallet. $400.00
docfarmall
New member
- 1,947
- 26
- 0
I am coming down I have
mesh stretchers 6 @ $20.00ea
the old canvas ones too 4 @ $35.00 ea
trailer safety chains 4 @ $10.00 ea
lots of master cyclinders 3 @ $20.00ea
jacks all for M200 should fit others too. 3 @ $25.00ea
New deuce radiator 1 @ $600.00
1008 grill insert. 1 @ $20.00
door panel 1 @ $20.00
AND ME.
Things im looking fer
mess utensils
mess kits with or without
trigger finger mitts by the case and liners
wool socks
large size field jackets
white mickey's
polar tec
Trioxine tablets lg an sm
canteens
long johns
and parts dog tag machine
cheap 11.00x 20 radials
larger field jacket liners
Small shoulder flags (American)
push pins
flash lights angle head
bruce lights shorter ones
donkey donkers steel and plastic donkey (d_ _ kers)
dot 5 traded fer some but some how he lost sold 10 gal of the swap hummmmmmm
Air Force blue paint also
Base for addressograph machine I need me one mine has a broken legg.
mesh stretchers 6 @ $20.00ea
the old canvas ones too 4 @ $35.00 ea
trailer safety chains 4 @ $10.00 ea
lots of master cyclinders 3 @ $20.00ea
jacks all for M200 should fit others too. 3 @ $25.00ea
New deuce radiator 1 @ $600.00
1008 grill insert. 1 @ $20.00
door panel 1 @ $20.00
AND ME.
Things im looking fer
mess utensils
mess kits with or without
trigger finger mitts by the case and liners
wool socks
large size field jackets
white mickey's
polar tec
Trioxine tablets lg an sm
canteens
long johns
and parts dog tag machine
cheap 11.00x 20 radials
larger field jacket liners
Small shoulder flags (American)
push pins
flash lights angle head
bruce lights shorter ones
donkey donkers steel and plastic donkey (d_ _ kers)
dot 5 traded fer some but some how he lost sold 10 gal of the swap hummmmmmm
Air Force blue paint also
Base for addressograph machine I need me one mine has a broken legg.
Last edited:
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Like to look at the M1008 grill Doc.
docfarmall
New member
- 1,947
- 26
- 0
Back home in the Hanoi Hilton . WOW WHAT LUCK .
OH 
OH
Last edited:
goldneagle
Well-known member
- 4,492
- 983
- 113
- Location
- Slidell, LA
I have a nice one available. $10 Can send it with juanprado to rally or mail for $3 more. PM me if interested.
1crook
Member
- 221
- 0
- 16
- Location
- Bethlehem, GA
I will have some specials at the rally. I have decided in order to move more inventory and encourage more rally attendance, I will have $40 deuce master cylinders each and $15 IR lights each. I am putting a limit of 5 of these each for each person if they want to buy them just to make sure that those that want some of them can get some. I will not hold any aside for anyone, first come, first serve. You must show up at the rally to get this deal.
I will also have pairs of the armor lights that include the IR light and headlight with mounts for $150 a set(two lights and two mounts).
I will also have pairs of the armor lights that include the IR light and headlight with mounts for $150 a set(two lights and two mounts).
- Status