Official 2015 Ga. Rally buy/sell/trade thread

[Ferroequinologist]

My dad has decided to sell one of his generators. I will be making a classified ad but wanted to offer it to the rally goers first.

1982 MEP-002 5kw generator. 316 hours. Runs great and produces power well under load. Recently had oil change and new filters installed. Fuel and oil. Almost full tank of fuel.

Missing one battery bracket and the voltage/phase selection switch went to single phase 240 and is stuck. I haven't even attempted to fix it as that was the setting we needed anyway. I am only loading it up if someone speaks for it. $1750 rally price. I will throw in a couple of sections of heavy duty militay grounding rod as well.

 

[73m819]

Originally Posted by 73m819 View Post

SWISS and 73m819 want and committed list
SWISS -- Need an 800 series steering column. Found one
SWISS -- Trade or Buy Looking for 11 G177 tires, can trade 7 good 14x20's, 3 are new.
73m819 -- I am looking for 4 of the cab outside grab hand holds, these are mounted on the tub just before or right at the rear corner curve of the tub,. found some
Rmtaunton -- Snatch block for 5 ton, We have MORE then 1, talk to swiss
]swiss -- Joe put swiss down for a set please (pole set)
73m819 -- Put 73m819 down for a set, thanks (pole set)
73m819 -- Looking to buy or trade for TWO clear lenses for the single light armored head lights. Will swap a pair of ir lenses for clear if someone is looking for the ir lenses.
73m819 -- Sorta looking for TWO 939 a0/a1 fuel tanks NOT a2 or tractor, or the small wrecker tank.
73m819 -- Someone buys this truck, talk to me about driving it to where it needs to go.(Sandcobras truck)
73m819 -- will take 3 81mm brown
swiss -- Another 81 brown please And 2 60
swiss -- Looking for some Jameson Florescent lights not at e-bay pricing. PM me if you have some to sell. (do not know if this has been found ???)
73m819 -- Twight, I have 3 specter fuel cans at you place (i think) that I brought from Carnac, could you PLEASE bring them to the rally, thank you. (dealt with)Thank You
73m819 -- I WILL take it (939 air drier) if joe does not. ALSO looking for a 939 foot brake treadle valve
Andyrv6av8r -- I think I have 2 driers Ron.
sandcobra164 -- Ron, I have a M939 series treadle valve with pedal, new never used. I'll confirm tomorrow, gotta dig through my parts bin.
73m819 -- I sure would like 4 PSP sections
73m819 -- Adam, I could use a metal air gauge, NOT one of those crap plastic ones.
73m819 -- looking for A 809 series front winch drive shaft.
73m819 -- looking for 200' of 5/8" NEW winch cable
73m819 -- Looking for 2 or 3 G177x20s, on or off rim
73m819 -- Looking for a METAL water temp. gauge and sending unit as a set
73m819 -- I will take a glad hand bunch, need at least two with glad hands.
73m819 -- need ONE fuel gauge selector switch with lever, a NEW need has made it self known
73m819 -- Need TWO military on/off switches with lever,
73m819 -- Need TWO 809/939 start switch with lever,
73m819 -- Need FOUR extra levers for the military switches
Swiss -- a 5 step boarding ladder from Dave.

I think this is ALL, I hope, as it is NOW, I am going to need to acquirer (DID) a BIG trailer just to haul ALL our acquired goodies back to the AO and the FOB.

73m819;1779939]Have a SS member that will not be at the rally, he is looking for,
A level wind for the front 5t wench,
A tractor behind the cab gear box,found one
TWO GOOD 1400rx20s on the two piece 5t rims

We are looking for a spare for the 105, 900x20 ndt, does not have to be good enough for steer tires but NO cracking or checking AND holds air
73m819 -- is bringing 6 5t front snatch blocks, get a price from SWISS

 

[Al Harvey]

Okay here is my list of buyers.

M809 Brake Hose - Ferro x2

800 Series Boots - Timntrucks x2

20mm Ammo Cans - Swiss x2

81mm Ammo Can - 73m819 x3 Swiss x1 Coffey x1


If anyone else is wanting ammo cans, please PM me and let me know. I'm trying to determine space available for the trip.
http://www.steelsoldiers.com/showth...al-2015-Ga-Rally-buy-sell-trade-thread/page21 Post #203


I've also got a 2 each of these 500 gallon Collapsible Fuel Barrels and Water Barrels. The plastic was still around them, they got the connector and repair kit (repair kits did get some water in them). $250 each Let me know ASAP if you want one as I'm trying to see if I'm going to have room to load them.

 

[Streamline]

Im in need of around 20 or so 50cal Ammo Can lids! If you have some with good seals, and Light surface rust is ok. Let me know and a price per lid. Thanks

 

[Streamline]

I will bring some 20mm Ammo Cans to the show if anyone is interested:
These make Great Center consoles or Motor cycle saddle bags, or Storage rack like picture below.

Asking $26.00 pre order.

Picture from Pirat4x4

************************************************************

I have these Surgical Tables available for Pre Ordered Only

Asking $150.00



************************************************************

I have these Cambro Food Servers available for Pre Order Only
These make a Great
Asking $140.00



Contact me if you want to order one of these items.

Also Check out my other items available in past pages at links below:

My .223/5.56 Stripper Clips with loaders and Early Vietnam Bandoleers Sets
http://www.steelsoldiers.com/showth...al-2015-Ga-Rally-buy-sell-trade-thread/page37

My AR500 Steel Targets and Vehicle Armor that we know offer:
http://www.steelsoldiers.com/showth...al-2015-Ga-Rally-buy-sell-trade-thread/page14

My Submersible heater, Older Burner, 11x11 CP Tent Frames
http://www.steelsoldiers.com/showth...al-2015-Ga-Rally-buy-sell-trade-thread/page20

Thanks Bobby

 

[Recovry4x4]

Okay here is my list of buyers.

M809 Brake Hose - Ferro x2

800 Series Boots - Timntrucks x2

20mm Ammo Cans - Swiss x2

81mm Ammo Can - 73m819 x3 Swiss x1 Coffey x1


If anyone else is wanting ammo cans, please PM me and let me know. I'm trying to determine space available for the trip.
http://www.steelsoldiers.com/showth...al-2015-Ga-Rally-buy-sell-trade-thread/page21 Post #203


I've also got a 2 each of these 500 gallon Collapsible Fuel Barrels and Water Barrels. The plastic was still around them, they got the connector and repair kit (repair kits did get some water in them). $250 each Let me know ASAP if you want one as I'm trying to see if I'm going to have room to load them.

View attachment 587911View attachment 587910 View attachment 587913View attachment 587912 View attachment 587914View attachment 587915View attachment 587916

Al, if you remember, have room and have time, I'm looking for the CUCV buss bars.

 

[Al Harvey]

Al, if you remember, have room and have time, I'm looking for the CUCV buss bars.

Sorry forgot to out you on that list. But I got it written on my board.

 

[Recovry4x4]

Sorry forgot to out you on that list. But I got it written on my board.

Thank you Sir.

 

[docfarmall]

Doc needs a battery box for a 1008 front one at core support be nice to have to have top an the bolts to. While askin might well go all the way.

 

[patracy]

Still looking for a 12 bolt 37" hmmwv wheel/tire assembly.

 

[CARNAC]

I need a good condition drivers seat for my former range control 2008 Ford F350 with the tan seats (manual seat). The internal foam and wire suspension is shot in my seat bottom. Also need a cover plate for the tailgate or will take a complete tailgate. Center console lid. If anyone has a good deal on wood for redo'ing a 24' trailer deck, I'd be interested.

 

[RAYZER]

No longer looking for the m819 fuel tank, Floridianson has found one for me.
Thanks James!

 

[lostnbfe]

Looking for a good working speedometer for a CUCV.

 

[swiss]

Titan 5 ton NDT tires on 5 ton rims, 2 80 percent thread, 6 60% thread. 10 40 percent thread

$75 on the 2 good ones
$60 on the 60 percent
$40 on the 40 percent

Will bring pre sold

 

[wheelspinner]

Looking for a good working speedometer for a CUCV.

If you don't find one, keep in touch, I have one in NY but won't be back there before the rally

 

[MWMULES]

Ok have loaded trailer and here is what I am bringing pre orders.

zebedee pick mattock

CARNAC set of litter wheels, water bladder system, Sked and pay you for solar shade

lostnbfe one SHA tent stove


swiss one 5 step boarding ladder

juanprado one 5 step boarding ladder

Recovry4x4 Combat crock pot and green mesh litter on approval

Mad Hatter 58 one 5 step boarding ladder

wheelspinner one 7 step boarding ladder and p/u one set route lights

Al Harvey one 16x16 liner, 3 SHA tent stoves, 1 RAK30 mre heater, Litter Racks 1 set, Sked Stretcher and chain covers.

camnite water bladder, 1 green mesh litter

73m819 SHA wood burner stove

Streamline 2 of the Tan Vestibules

walkerhunter 1 of the Tan Vestibules


twright getting Coffee and 2 rear MRAP seats

davidhdale two Green canvas litters

JOECOOL48 one green mesh litter. P/U camo pole adpt if has extra.

ThunderCracker three Jameson lights

da69fishman SHA stove

swbradley1 one bag aluminum camo net poles, two black mesh litters. P/U tent stakes

P/U two master Cyl from clintogf

I will have lots of tail gate chain cover for all who ordered and those who didn't, also 20+ MRE RAK30 24V heaters with plug and GID3 bags all 3 items at special Rally price.

Also have a few NOS sets of the MRAP mirrors w/ arms left at $20 a pair
If I forgot something please PM me.

 

[rebelqwes87]

Here's a list of what I'm getting from who. If I missed you please PM me.

Clintogf: MRAP Mirrors & LED Taillights

3dAngus: Pup Tent

JOECOOL48: Camo support set

Gunnermac: Super rope

Wheelspinner: LED route clearance lights

Stonepicker1: Fuel Filters (2)

Goldneagle via Juanprado: 5 ton Interior Door Handle

MDSA: Wooden Bowl

Here's a list of what I am bringing and for who. Again, please let me know if I missed you.

TaylorTradingCo: (3) 9.00r20 NDT tires/wheels

Docfarmall: Springer Seat Back

73m819: Tool Box

 

[Recovry4x4]

Glad you have plenty of combat crock pots Dave, I didn't see my name. I did see it in an earlier post on a toe tag. LOL


You made the list!

 

[CARNAC]

Here's what deals I have....I forgot. Applesauce. I want MRE applesauce. With prunes this time.

 

[Floridianson]

Have been told my 5 step ladders might be priced a little high so one 5 step alum ladder and one hand rail with mounting hardware for $130.00