Official Deuce Aftermarket Wheel Thread

[number9]

It very well could have been air pressure or driver error! hehe. I guess I missed the date you posted. I didn't have the rims at that time.

Well, I drove up there with 100psi in them and only dropped them down to 80psi before hitting the trails. Was too lazy to air them bac up before hitting the road home or I'd have dropped them more. Next year I WILL drop them more if I am still running them at Haspin.

...

 

[biggun68]

just got my new wheels and tires alot of work but love it

 

[gimpyrobb]

Looking good biggun! Never thought about two tone.

 

[Kohburn]

that 2 tone looks sharp

 

[biggun68]

Thanks here's some more pics when i was cutting them

 

[jesusgatos]

Those look great. What kind of wheels did they start out as? How wide and what's the offset/backspacing?

 

[olly hondro]

This is what the A3 wheels look like on the A2, rear hubs flipped, back tracks the front.

 

[biggun68]

they are hemmt wheels 10" wide i put the studs on the other side for the rear wheels so i didn't have to flip the hubs i like the deep dish look in the rear. they track all the same and still drop the sides on the bed.

 

[jesusgatos]

Oh, that's just an interesting pattern that you machined into them when you cut out the center-sections. Looks good.

 

[baxter]

I have a couple of the 100dollarman wheels on the front of my truck as soon as I can afford I will order 5 more for the rear and the spare. I will try and get some pics of them up, before I put them on my tire rubbed the drag link on a full right turn now there is no rubbing. The tires went on nice and no tube gotta love that and Mark is a great guy to work with I just wish I had more money. As soon as I can sell one of my M16's hemmt wheels are coming.

 

[patracy]

Anyone have a clue about these wheels I picked up yesterday?

 

[100dollarman]

I have a couple of the 100dollarman wheels on the front of my truck as soon as I can afford I will order 5 more for the rear and the spare. I will try and get some pics of them up, before I put them on my tire rubbed the drag link on a full right turn now there is no rubbing. The tires went on nice and no tube gotta love that and Mark is a great guy to work with I just wish I had more money. As soon as I can sell one of my M16's hemmt wheels are coming.

Thx, Baxter--

Here are a couple of pics of our '100dollarman wheels'-
They have evolved over the last couple of years to be used with flipped hubs in the rear. These are full plates made of hi quality 3/8" steel bolted on the outside face for perfect backspacing. Along with the 16 wheel bolts holding them, we (or the customer) weld the plate to the outside 1/2 of the wheel on the inside.
We have them in stock.

I may have a slightly biased opinion (LOL!), but I think they are SEXY looking too!

 

[Ronin Warrior]

It's funny that every time I talk to you, your on your last 12 of them or anything else!

 

[gringeltaube]

I may have a slightly biased opinion (LOL!), but I think they are SEXY looking too!

Agreed on pic#2 and #3.....

while Truck#1 needs some cosmetic changes to qualify as "sexy"... IMO

G.

 

[johnsonbrandonj]

looked on the site... can't see. How much are the 100dollarman wheels?

 

[100dollarman]

It's funny that every time I talk to you, your on your last 12 of them or anything else!

Huh?

Agreed on pic#2 and #3.....

while Truck#1 needs some cosmetic changes to qualify as "sexy"... IMO

G.

LOL-- Ok.... How 'bout a face 'that only a Mother could love'! ?

 

[patracy]

Anyone have a clue about these wheels I picked up yesterday?

Best I can tell, these weren't used on a vehicle. Maybe they were on a trailer? FWIW, they had Michelin XL 12.5R20's on them. I still don't have a clue what they're off of.

 

[100dollarman]

looked on the site... can't see. How much are the 100dollarman wheels?

They are not on the site--

$350 each including a new valve stem. And if you buy tires too, we will mount them for free--

 

[kwiksilver]

My Long's wheels came in today. $1283 for six delivered to a local dock. Had 16 holes drilled in them for 5/8 bolts for the "hemmt" look. Only problem I have is all the valve stems are on the shallow side so, I have to flip my hubs. Weren't as bad to mount as I thought, but, airing up is proving to be a MF'r. . New can of ether tomorrow and see what we can do!

 

[cjtroutt]

My Long's wheels came in today. $1283 for six delivered to a local dock. Had 16 holes drilled in them for 5/8 bolts for the "hemmt" look. Only problem I have is all the valve stems are on the shallow side so, I have to flip my hubs. Weren't as bad to mount as I thought, but, airing up is proving to be a MF'r. . New can of ether tomorrow and see what we can do!

Nice looking wheel.