Official NC Denton Rally 2021 Buy/Sell

[LanceRobson]

I'd like the shackles if they are not spoken for & if you just so happen to come across another tall ladder with the handrail like you sold to Matt let me know. Been looking for one.

The shackles are yours. Thank you. I for sure don't have any more ladders. I sold my last trailer and last 5-ton last year. When we had the farm we had two of these, although the other one was 20' shorter and older.



Now that we sold the farm, downsized and moved to our North Carolina place in "retirement" I'm effectively out of MV ownership unless or until I build something (a lot smaller) here. I expect to still be vending at gun shows and perhaps get back into collectable quality militaria/WWII field gear and to visit with friends and acquaintances at MV shows some though. Now I spend more time on backpacking, canoeing and camping trips with my wife and teach climbing part time so this is really just cleaning up what little is left.

So if you see something you are interested in make a reasonable offer and I'll probably take it......

Best regards to all,


Lance

 

[Floridianson]

I can't speak to Florida law but when we sold our Upstate New York farm four years ago we signed all the papers a few days in advance of the buyer's closing so we could be elsewhere. I suspect you'll be able to sign early. Having bought and sold real estate in several states I know of no requirement that the seller be present for a closing.

Do you have any spare lids for the single depth medical boxes you have? I have an orphan bottom (2?) I'd like to get a lid for. Maybe two lids?

Best regards to all,


Lance

Yea been to more then my share of closing and always go early. With ADHD I can not sit for an hour without falling asleep. Looks like now they are saying closing is May first so happy me. No spare lids sorry.

 

[bikeman]

Tool/Parts cabinets like many M109 etc shop trucks and trailers have. They were assembled and used for a few months in my car hauler before I sold it. No rust, good hinges and hasps etc. 25-1/2" wide, 24 " tall and 16" deep. I have two. $30 each.

Lance, I'm interested in at least one of these cabinets.

 

[DutchmanZ]

any of ya'll have a Spicer 3053A transmission that you want to sell?

 

[LanceRobson]

Lance, I'm interested in at least one of these cabinets.

You got it. Thanks. If you want to change the handing of the hinges all you have to do is flip the front panel. How about both for $50?

 

[bikeman]

You got it. Thanks. If you want to change the handing of the hinges all you have to do is flip the front panel. How about both for $50?

Deal

 

[LanceRobson]

Yea been to more then my share of closing and always go early. With ADHD I can not sit for an hour without falling asleep. Looks like now they are saying closing is May first so happy me. No spare lids sorry.

Thanks. Bring me one of those medical chests, please. I have some of the double depth ones but would like one more single depth one.

So, I have two aluminum water and dust proof double depth medical transport chests with the center divider so they can be used with two separate sides or the panel can be put in the bottom of one side and they can be used as one large storage chest. $50 each or $90 for both.



Best regards to all,

Lance

 

[SCSG-G4]

Since there won't be a gun show to go with the MV Rally, was there anyone looking for once-fired 5.56 brass? PM me if interested as I have a contact.

 

[SCM35A2]

How bout anyone need a NOS Teledyne four cylinder. I paid $500 but will take good offers. Have plenty of Hardigg plastic storage boxes and will price out as per size. Aluminum Med boxes $45.00. Military tent lights $200.00 take the lights out and it can be used as a TSA approved gun case. Med tow bar collared with 1to1" & 1 to 3/4" feet with pins and two double chain clamps. Asking $325.00. Still have china reproduction steel windshield frame / glass for M37, Deuce or 809 series $150.00 per frame / pane. Used 809 series passenger side battery cover / step $40.00

Hey sir, I previously asked for one of the aluminum med boxes however I'd like to get two of them if they are not all spoken for. Thanks

 

[LanceRobson]

I"m loading today and came across a few more items:



Hmwvee cargo truck rear seat cushions, one pair, unused. The pair is also the length of one side of the 12' Deuce or older 5-ton troop seat. $40/pr.

One full case of MREs, they have been stored in a dark, cool place in my temperature and humidity controlled basement: $60/case.

A guaranteed good CUCV glow pug controller card from a running M1009 I parted out due to rust: $50 OBO.

Haldex air parking brake push-pull air valve, new with knob and rolled pin to install the knob after the switch is in the dash: $12.

Best regards to all,


Lance

 

[SCM35A2]

I"m loading today and came across a few more items:

View attachment 831845View attachment 831846View attachment 831847View attachment 831848View attachment 831849View attachment 831850View attachment 831851

Hmwvee cargo truck rear seat cushions, one pair, unused. The pair is also the length of one side of the 12' Deuce or older 5-ton troop seat. $40/pr.

One full case of MREs, they have been stored in a dark, cool place in my temperature and humidity controlled basement: $60/case.

A guaranteed good CUCV glow pug controller card from a running M1009 I parted out due to rust: $50 OBO.

Haldex air parking brake push-pull air valve, new with knob and rolled pin to install the knob after the switch is in the dash: $12.

Best regards to all,


Lance

Id like the Haldex air parking brake push-pull air valve if its not spoken for.

 

[LanceRobson]

Id like the Haldex air parking brake push-pull air valve if its not spoken for.

You got it. They'll be with the shackles. Thanks.

 

[TacMac2012]

Some more stuff I am bringing:

Set of HMMWV tires/wheels loaded. BFG MT's on 24 bolts. $800/4.
Three 12 bolt wheels, $50 each? Maybe $125 for three?
Some various HMMWV cargo covers or soft tops.
A couple HMMWV starters
LMTV tire/wheel $150
Quite a few Jerry cans
HMMWV Underbody protection kit in crate, $800

Various other stuff, I have a TON I am bringing. My MTVR is loaded full and my Excursion will have a very full trailer behind it.

 

[kubotaman]

I'm looking for any CUCV parts. Could use a clean set of M1009 front seats, doors, fenders, and tailgate.

Thanks

 

[wheelspinner]

I'm looking for any CUCV parts. Could use a clean set of M1009 front seats, doors, fenders, and tailgate.

Thanks

Are you coming to the Denton NC rally?

 

[kubotaman]

Are you coming to the Denton NC rally?

Yes

 

[LanceRobson]

Digging under a shelf I found some M939 Series maintenance and parts manuals and a -14&P for M105 trailers. All are a little sooty and dusty on the outside from years on the shelf in our working farm shop but the pages are clean. They are in heavy duty three ring binders. Make a reasonable offer and they're yours...... SOLD!!




Best regards to all,


Lance

 

[SCM35A2]

Digging under a shelf I found some M939 Series maintenance and parts manuals and a -14&P for M105 trailers. All are a little sooty and dusty on the outside from years on the shelf in our working farm shop but the pages are clean. They are in heavy duty three ring binders. Make a reasonable offer and they're yours......


View attachment 832003View attachment 832001View attachment 832005View attachment 832004View attachment 832002View attachment 832000

Best regards to all,


Lance

I have no clue what to offer bud, so message me or post here what you think they are worth & Ill take them all.

 

[SCM35A2]

Looks like they are calling for a 89% chance of rain on Saturday, so I'm going to ride up on Friday instead. Those I'm buying parts from will you be there that day as well??

 

[LanceRobson]

I have no clue what to offer bud, so message me or post here what you think they are worth & Ill take them all.

You beat Matt by a minute. I was thinking $50 for the lot but am willing to be flexible.....The manuals are sold!!


Lance