Oil Cooler Lines

[82KBody]

Hello All! I don't have a CUCV (Wish I did) But a Civi model truck, I was told the Oil Lines are the same are they 3/8s thread too? So I thought bcuz these are Plentiful unlike the Civi model trucks having extremely high mileage & very rough wear n tear vs the CUCV's... I am in need of some in Nice shape from the Back of the Drivers side Eng block to the Radiator (Where they Connect) not all the way through.

I am not very knowledgeable on these, As I've only been around the Civi's the reason i ask on here instead of having new made/Reproduction (nothing but neg reviews) I wanted Genuine/NOS is too hard to find... I have been on here before looking threads for this specific reason & in-case I have saved the Part #s to those Items posted.

Let me know what any of you guys have. Mine eng is the 1982 Red Block 6.2L at 95% Restored Assembly Just needing the lines.

 

[cucvrus]

1986 CUCV M1009 Decade after being wrecked.

The more I look the more I find. I removed the radiator today. I am optimistic about this radiator. It appears it has been replaced. The aluminum oil cooler lines have both been replaced. The bracket is missing that holds the cooler line in place on the fan shroud so someone opted to use wire...

www.steelsoldiers.com

I hope this helps. These oil cooler lines fit just as good as any of them. Good Luck.

 

[82KBody]

1986 CUCV M1009 Decade after being wrecked.

The more I look the more I find. I removed the radiator today. I am optimistic about this radiator. It appears it has been replaced. The aluminum oil cooler lines have both been replaced. The bracket is missing that holds the cooler line in place on the fan shroud so someone opted to use wire...

www.steelsoldiers.com

I hope this helps. These oil cooler lines fit just as good as any of them. Good Luck.

Do you know if they are made in USA??? Don't want Chinese junk, Reason being I'm doing an all NOS Restoration and have probably 3,000+ Just in the motor and about 8-10K NOS in the truck.

 

[doghead]

Thread closed, discussion move to different thread.