• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Oil seal mod. for 3053 input shaft

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,995
2,568
113
Location
Montevideo/Uruguay
The good thing is that our input shaft doesn't have to be touched, where the seal lip gets to ride on.
The bad is that the stock retainer simply doesn't admit any such mods, to make room for an adequately sized seal (typically 2.0"×1.5"×0.25").
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
326
0
Location
gainesville, ga.
If ANYBODY can build this much needed mod, Steve can, with him being basically a one man operation, it is a wonder he has time for the R/D for this project.
 

peashooter

Well-known member
1,038
205
63
Location
Hanover, minnesota
Gerhard and I talked about this at the GA. rally. This is what i have at this moment. 100% welded to the ID bore, to be fully machined out by next week end. Who is on board?
Looks like a good plan steve, should be way more cost effective than a 1 piece billet part. What is your expected sale price for this?
 

rustystud

Well-known member
9,298
3,074
113
Location
Woodinville, Washington
That's a pretty cool idea and at only $178.00 a great deal ! I wonder if they can build our housings and grind our shafts for that price ? Think I'll call them tomorrow.
Called "Novak" today and they said they would not do a project with this limited amount of interest. I guess we in the MV world don't count for much ! Hopefully Steve will be successful in getting a working unit out for us.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks