• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Packing Bearings

F18hornetM

F18hornetM

Active member
1,135
10
38
Location
Ocean City, Md
You can wipe them off to inspect the condition of the rollers and the cage and feel for looseness with out washing. If the grease is that hard, old that you can't see the rollers or feel for play than maybe you do need to wash it out.
I also wipe old grease out of the hub and wipe new grease in. More than one way to skin a cat for sure. Some of the schools Ive been to said do not wash. 30 years of packing and inpspecting truck and trailer bearings havent had one fail yet.. [knocking on wood] LOL
 
ryan77

ryan77

Well-known member
2,584
56
48
Location
Cary IL
bearboley said:
I will debate, why not. I think you have a good point, if it has metal shavings in it or real funky I would not put t in the parts washer either. Solvent tends to remove grease so if there not real dry it becomes sloppy for sure.
Click to expand...

Thats why i do a final rinse in brake cleaner and blow dry with compressed air! Ends up clean and dry! Ready for the application of new grease!!
 
F18hornetM

F18hornetM

Active member
1,135
10
38
Location
Ocean City, Md
Nothing wrong with your way of doing it, just not really needed. Also you know about not spining bearings with air of course. Can not only fly apart but cause damamge to dry rollers. If you must blow out, blow straight through the cage
 
gringeltaube

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,996
2,575
113
Location
Montevideo/Uruguay
phil2968 said:
I wash the bearings to inspect for pitting and wear. After you wash you dry the bearings. I have washed the grease out of bearings and the rollers fell out of the cage, the bearing was worn out. I also remove the old grease from the hub.
Click to expand...
ODdave said:
.... Either way, no matter how your doing it as long as your getting clean new grease packed between the rollers and not just on the outside your doing it right....
Click to expand...
:ditto: .... to both!

G.
 
F18hornetM

F18hornetM

Active member
1,135
10
38
Location
Ocean City, Md
I'll have my bearings packed before you and ill be sitting on the porch drinking beer. :p
Serioulsy, to each their own.

I wipe the beraings clean with rag, then when packing wipe off the old crap that comes out, rotate bearing cage, so rollers turn and pack some more untill clean new grease comes out..All done!!
 
ryan77

ryan77

Well-known member
2,584
56
48
Location
Cary IL
F18hornetM said:
Nothing wrong with your way of doing it, just not really needed. Also you know about not spining bearings with air of course. Can not only fly apart but cause damamge to dry rollers. If you must blow out, blow straight through the cage
Click to expand...
I use low air pressure and yes i know about the springs! Lol
 
F18hornetM

F18hornetM

Active member
1,135
10
38
Location
Ocean City, Md
good you use low air, but dont dont know what you mean about springs?? I meant spinning the bearing with air.

And Ive packed them for a living for a lifetime, so pretty confident it works.
great debate though ...:D. We all learn alot from sharing ideas and experiences, so all good. Ive been working on trucks as a living for 30+years and learn something new everyday.
 
You must log in or register to reply here.
111,248members
165,515threads
2,329,296posts
876online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks