• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Paint question

galeo7171

Member
207
1
16
Location
Cumming, Ga
I'm going to repaint my m1009. I don't have access to an air compressor so I'm thinking about ordering the 383 carc substitute in spray cans from Rapco. Is it possible to make it look half way decent? Will it look a lot worse because I'm using spray cans instead of an air compressor?
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
What about an electric sprayer like the Wagner? Anyone use one of those?
I don't think you could get consistant coverage with a spray can.
 

wsucougarx

Well-known member
6,951
67
48
Location
Washington State
I do not have an air compressor. Could I use the emergency glad hand off the back of my deuce to paint the truck? Is the air pressure high enough? Please advise
 

ida34

Well-known member
4,120
33
48
Location
Dexter, MI
It is not a question of high enough pressure. Most air paint guns use lower input pressure than the compressor pressure. The big problem is volume. I would say the deuce air system would not provide enough CFM to properly paint with.
 

wsucougarx

Well-known member
6,951
67
48
Location
Washington State
Re: RE: Paint question

ida34 said:
It is not a question of high enough pressure. Most air paint guns use lower input pressure than the compressor pressure. The big problem is volume. I would say the deuce air system would not provide enough CFM to properly paint with.
Thanks
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
Even if it did have the pressure and volumne, other issues such as running the truck to keep up the PSI & CFM will cause exhaust particles in the wet paint, and, is the air system completely free of moisture and oil?
Small compressors should not be expensive to rent, just make sure you get one suitable for the gun you're going to use.
 

AJMBLAZER

New member
2,688
8
0
Location
Paducah, KY
Do a search. This was discussed fairly recently in the conversations forum and various vendors for it were discussed along with their merits.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks