• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Pair of 1968 M36a2

Just another Joe

New member
13
14
3
Location
Los banos CA
Just purchased a pair of m36 trucks her in ca. planned on bobbing one of them. They are not the cleanest units but seem pretty complete. seems the m36 is harder to find. Any reason not to cut them up ? I am totally new to these rigs and not even sure I’ll be able to get them registered.
 

Attachments

jeffhuey1n

SMSgt, USAF (Ret.)
Steel Soldiers Supporter
1,892
1,486
113
Location
Laramie County, Wyoming
I’ve never been a fan of bobbing but they are your trucks. You get to choose their fate. What other people think is just so much bad sushi. You don’t have them registered? Do you have their titles? That’s going to be tough to overcome. I’m not familiar with California DOT rules but you want to get your answers before you start working on them.
 

Just another Joe

New member
13
14
3
Location
Los banos CA
I’ve never been a fan of bobbing but they are your trucks. You get to choose their fate. What other people think is just so much bad sushi. You don’t have them registered? Do you have their titles? That’s going to be tough to overcome. I’m not familiar with California DOT rules but you want to get your answers before you start working on them.
I
I’ve never been a fan of bobbing but they are your trucks. You get to choose their fate. What other people think is just so much bad sushi. You don’t have them registered? Do you have their titles? That’s going to be tough to overcome. I’m not familiar with California DOT rules but you want to get your answers before you start working on them.
i have the bill of sale from the auction company. CA is a pain in the ass for everything. Would love to leave them 3 axle but don’t want to carry the class B lic if I don’t absolutely have to.
 

jeffhuey1n

SMSgt, USAF (Ret.)
Steel Soldiers Supporter
1,892
1,486
113
Location
Laramie County, Wyoming
I

i have the bill of sale from the auction company. CA is a pain in the ass for everything. Would love to leave them 3 axle but don’t want to carry the class B lic if I don’t absolutely have to.
I understand. That’s one of the reasons I’ll probably never move back to CA. Parents left there when I was 3yo and except for a 3 1/2 year tour there in the Marine Corps, I haven’t been back.
Best of luck to you, hopefully you can create the truck you want without too much CA poofter.
 

Valley Rock

Big wheeler cat peeler
Steel Soldiers Supporter
442
832
93
Location
Orygun
Long wheelbase trucks are hard to come, by I would love to have one .

I can't even fathom cutting one up, but to each his own .

That being said I have some front springs w/hangers should you want em .

Those trucks look really clean in the picture
 

SCSG-G4

PSVB 3003
5,379
3,413
113
Location
Lexington, South Carolina
M-36's complete are worth at least one and a half more than an M-35 in similar condition. So, you could get three M-35's for what you have. They are less than 25,000 gross weight, so no CDL required (nationally - Kalifornia is probably worse). They are your trucks, but if you bob them you make every remaining M36 more valuable!
 

Just another Joe

New member
13
14
3
Location
Los banos CA
I'm betting you can find someone on here to trade your M36s for M35s, maybe even bobbed ones.

I wouldn't cut them up. I'm still sad the farmer across the street cut up their three or four gasser M36s, even if they no longer had the cargo beds on them.
I would rather not cut something up that’s hard to find. I’ll get them home and see how to proceed.
 

Just another Joe

New member
13
14
3
Location
Los banos CA
M-36's complete are worth at least one and a half more than an M-35 in similar condition. So, you could get three M-35's for what you have. They are less than 25,000 gross weight, so no CDL required (nationally - Kalifornia is probably worse). They are your trucks, but if you bob them you make every remaining M36 more valuable!
this state makes having any fun really difficult. Only reason I wanted a two axle is so I don’t need the class b lic.
 

G744

Well-known member
Steel Soldiers Supporter
1,725
3,884
113
Location
Hidden Valley, Az
Does Ca have a historic vehicle licensing program?

AZ does, completely non-commercial no restrictions other than carrying really heavy loads. Has to be 25 years old or more.

DG
 
  • Like
Reactions: HDN

Just another Joe

New member
13
14
3
Location
Los banos CA
Long wheelbase trucks are hard to come, by I would love to have one .

I can't even fathom cutting one up, but to each his own .

That being said I have some front springs w/hangers should you want em .

Those trucks look really clean in the picture
Got one running with the fuel shut off moving freely and about 1/8 mile down the road it shut down. Broke the tit off the shut off pin. Now the rod inside seems stiff 🥴 used the pin from the other truck to test it and it won’t spring back. Back to the drawing board. Ran really well for a bit.
 

Just another Joe

New member
13
14
3
Location
Los banos CA
I should be picking one up this week unless it's been stolen already. Finding someone local to haul the m36 is proving to be a challenge.
It’s still there. Wish I would have bought that one as well. One of mine is missing a few key parts. We towed one home with a strap and a truck will pick up the other. I think I could have made two complete with all three.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks