Parting out an mep 003a runs good

[maddog]

Decided not to try to make it make electricity.
MAKE OFFERS SEE BELOW- BLOWOUT SALE - EVERYTHING MUST GO - ETC ETC.
Motor runs great. Had it running for a couple hours with 40 psi oil pressure and it charged the batteries just fine. Air vents at exaust opened as they should after warm up.

I am parting it out.

Please let me know what you are interested in and I will let you know if I still have it. Some parts have been promised already. If I have promised it to you, please speak up soon.

Thanks
Jim

I will sell the motor but not the injectors or pump. (unless you make an offer I cant refuse, otherwise I will keep that stuff as spares)

I will ship any of it anywhere USA you pay shipping.

Always interested in an interesting trade. Gold, lead, hardware, etc. You get the idea.

 

[rat4spd]

I'd like the float switch and level indicator, or the whole fuel tank assembly depending on price. PM me your price please.

David Ames

 

[coyotegray]

Ill take the fuel pumps... All 3... IM me with a $..

Thanks,
Andy..

 

[Monkeyboyarmy]

Any gauges on the panel?Starter?Fan guard on generator end?

 

[maddog]

I have read the replies and the PMs. I will get back to all of you tomorrow with prices, I just dont have the time right now.

So far none of you are asking for the same thing and I have everything you all have expressed interest in.

Thanks for the interest.

 

[jbk]

hello i had asked you about a good fuel tank a while back when you were thinking about parting out. let me know if you still have and how much. thanks

 

[maddog]

Ok, here is what I came up with. If anybody thinks any of these prices are too high, just tell me what they should be. I just want to be fair and hopefully I will recoup some of my investment.

Everything electrical looks to be in order but cant confirm the 120-240/208 stuff. It just didnt make electricity.


All prices are PLUS shipping- SPF = sold pending funds

Fuel tank - no leaks (I had fuel in it)(no fuel sensor or gauge)(cap and strainer included) slightly dented on top corner - $45

Generator end fan cover (louvered) - $15

Engine - running good, I guarantee it- no injectors or govener or motor mounts - just the engine- $400

Generator head - $175

Both engine and generator head together as a unit - $500

% of load, gauge - $30

master start switch and amp/volt transfer switch- $50 (with knobs)

1 panel light - $15

air cleaner canister (no filter or hose) - $50

All sheet metal (includes mechanism to open louvers and it works)- $125

Oil cooler - $75

Slave recepticle with wire (24v) - $25

motor mounts (2 available) - $25 ea

I didnt list everything, so if you are interested in something I did not list, just ask.

The ones that asked for specific things already you have first dibs. Please pm me with a conformation.

I will keep this list updated. If I have not answered you PMs, contact me again.

 

[maddog]

I have posted some pics of the unit I am parting out so you can see the condition of things.

Note the dent visible in 2 photos of the dent in the fuel tank. It does not leak.

Additional items I forgot to mention-

fuel pumps - $40 ea.

fuel filter assembly - $40

 

[maddog]

Sold some stuff, still have what is listed above, Make offer. I need to move this heavy metal.

 

[maddog]

Bump.

 

[jbk]

i need a freq, transducer and good hertz gauge if ypu still have. i sent you a private message a while back. let me know jim

 

[Sundance]

Sent PM on 9/19 regarding 24 volt voltage regulator. Haven't heard back but still need it.

 

[maddog]

I have shipped all the sold parts and I think I have answered all PM's.

Make offer on the remaining stuff.

Thanks

 

[maddog]

Bump

 

[djwils285]

i can use a few parts from a MEP-003a

In particular, i need the push button circuit breaker that protects the convenience outlet. Also need the voltmeter. Send me an email on djwils285 AT aol.com
Do you have these leftover?
Regards!

 

[doghead]

I am in need of a master control switch (pre heat, off, prime, run, start). Also need a panel light bulb.

Will $20 get them to me, if you have them?

 

[hurst01]

Maddog,

I sent you a PM but haven't heard from you. I need the reconnection switch (under the flip down door on left side of control panel) that changes it from 120v-120/240 single phase and 240v 3 Pz. I also need a transducer.

Ed

 

[doghead]

I'm still waiting to hear back as well.

No rush, anytime later today would be great!

 

[doghead]

Maddog, you posted a link to this thread for the guy looking for sheetmetal. I never heard back on the parts I needed.

 

[JSheehan]

Need hand throttle

Looking for hand throttle for MEP 003A. Is this gone?
Thanks