Pic thread? Looking for m1008's with minimal lift.

[skateabrock]

6 inch springs up front, one inch zero rates up front, shackle flip and 2inch blocks in the rear. fender trimming and some 42's

 

[allrevup]

Nice!

Looks like you have added dual tanks or is that a civie in O.D.?

I was just looking at a SS classified for two 20 gal. civilian PVC Diesel tanks and what appears to be new sending units including switch over = at least 600 miles cruising range

 

[Matt65]

Good Catch! Wished I had dual tanks.

 

[skateabrock]

no duel tanks, i robbed the bed from another truck, this is what it looked like when i bought it.

 

[allrevup]

Earlier I said Nice!
about your truck, now after looking at the before photos ...
let me ad "GREAT RESTORATION"

Do you still have the artic kit?

 

[skateabrock]

sure do!

 

[Alucard-HD]

I planed on a 4 inch lift and 35s, if i trim enough, id stuff 40s under there. wth the turbo going on soon, i figure freeway speeds should be better.

 

[Marty G]

Just starting my build.

37 in interco truxus mt (37.5 in mounted) on humvee 8 bolt wheels.

First finder cut no lift no inner fender soon to be 52 in front springs.

 

[dstang97]

Just starting my build.

37 in interco truxus mt (37.5 in mounted) on humvee 8 bolt wheels.

First finder cut no lift no inner fender soon to be 52 in front springs.

Love those tires and rims...I was thinking about buying those tires how do you like them? are the bias or radial?

 

[Marty G]

Radial 10 ply not got to try them out yet Ive only got one fender cut still need to cut the other side and the bed.

 

[AJMBLAZER]

I had a set (different size) and loved them.

How's the width of those 37's?

 

[dstang97]

did they last a long time? mine would be for a DD and a little off road use.

 

[Marty G]

How's the width of those 37's?

Thea are 12.50's but look more like an 11.50 i like a narrow tire though the more i can keep in the fender the better.

 

[AJMBLAZER]

did they last a long time? mine would be for a DD and a little off road use.

Yes. I had 255/85R16's (33x10ishR16) Load Range D's on my '96 Ranger 4x4 and I never could get it to align right (partly my fault, partly Ford's) and despite that I was over 15k miles with lots of tread depth left. I wasn't past 40%. I was planning on at least 40k out of them. Sold the truck so I could get Big Ugly.

Thea are 12.50's but look more like an 11.50 i like a narrow tire though the more i can keep in the fender the better.

Good to hear. I do to as I don't wheel in deep mud, sand, or anything hard enough to really need a wide tire. I also might step down the tire height a bit with the next set...dunno. OD would be nice first but we'll see.

 

[Croatan_Kid]

Hey Marty G!

 

[86M10086.2L]

4 inch lift, 36" goodyear Military Hummwe wheels and tires, no trimming. Slight rub on a turn n' bump in a rut.

 

[Marty G]

Hey Marty G!

Whats up!

 

[Wyofj40]

STA Super Lug 9.00x16 and a 2" add-a-leaf up front

 

[Jett1]

bump

 

[bolognablake]

Just starting my build.

37 in interco truxus mt (37.5 in mounted) on humvee 8 bolt wheels.

First finder cut no lift no inner fender soon to be 52 in front springs.

Looks good!