I bought this last week, had it towed home. Brief backstory I was told first the motor was seized. The seller then was able to bar the motor over, and put in new batteries but the starter wouldn't do anything but click. I went to look at it ,the 3 batteries were in a 12v configuration. Hooked 2 into 24v and it spun right over.. bought it on the spot. Bill of sale says 1985. It's tagged with a 2011 rebuild on door and motor. Needless to say I'm pretty excited, it's rust free has heat and ac and appears to be in good shape.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Picked up a m915a1!
- Thread starter Bdfancy81
- Start date
- 10,436
- 6,486
- 113
- Location
- Camp Wood/LC, TX
Those brought around $10k + at auction back when they were sold.
I am not into it for nearly that. Little over half that. No keys, minor detail ordered new ignition.. all fluids looked nice and clean. I have all new filters coming. Pretty sure the breaks need some attention from sitting. Interior is pretty clean. New seats headliner and everything is as new . All lights work.
Attachments
- 10,436
- 6,486
- 113
- Location
- Camp Wood/LC, TX
Yeah you did good, with 11.00-24.5’s you can get a comfortable 65 mph out of the truck. Simp on here put 10s of thousands of miles on one cross country before an oopsie happened.
They are as dependable as the sun rising.
They are as dependable as the sun rising.
M35fan
Well-known member
- 1,166
- 3,992
- 113
- Location
- Arab, Alabama
That's a nice looking truck. Congratulations!
I won't be using it as hard as that. I ordered a new kx080-4 kubota mid November. Was looking for a SA 7 yd dump to haul it but up in maine most everything has alot of rust or Miles. I kind of stumbled on this. It's not a dump, but in the meantime be able to move that 80 on a tag all easy. If you have tried finding a good low mile rust free dump lately you know they are scarce unless you are willing to pay $$$$. Is there anyone on this site that can give me info on the truck from the serial/registration numbers on the stamped plates?
Last edited:
- 4,296
- 3,122
- 113
- Location
- Fort Worth, Texas
That's a score! Congrats!! 
Lukes_deuce
Active member
- 447
- 124
- 43
- Location
- Long Island, NY
Was that the truck at Abbott equipment?
Yes it was.
- 2,096
- 646
- 113
- Location
- Orlando, FL
Yes. I have the same truck with A/C etc.
I'm the wrong person to ask I have zero experience with one. My last truck was an 813a1. Cab was pretty spartan compared to this.
Lukes_deuce
Active member
- 447
- 124
- 43
- Location
- Long Island, NY
Nice. I heard that was a nice truck and I wanted to go up there to see it. Just didnt have the time. Good luck with her.
- 652
- 529
- 93
- Location
- Reydon, OK
Nope don't feel bad at all!My truck is the same way! Nice score!
Do you feel bad about what you paid?
