Pics of mounting hardware for winter radiator cover.

[ida34]

Someone asked for pics of the mounting hardware for my radiator cover. I figured I would post them hear so it can be seen by all. I also installed my ring mount today. My daughter took plenty of pics and they will be posted soon.

Chuck

 

[jwaller]

do you have a pic of the mounting of the springs on the bottom of the grill cover? I have all but those and I cant seem to get it right per the instructions. they dont seem clear to me.

 

[Blake]

If anyone needs the mounting springs for the winter front grill cover, I have a friend with them new in bag

thanks.

 

[ida34]

I attach the springs to the heating inlet scoop on the driver's side and onto the hinge for the drop down cover on the side. I don't have the proper set up for the springs on the passenger's side but the truck does not complain. If I ever get off my butt to do it I will just figure out a good place and drill two holes for the springs.

I assumed your were speaking of the side springs on the bottom. I don't have anything that holds the actual bottom of the cover on.

I hope this helps.

 

[jwaller]

ya I run mine the same way and it works just fine. I figured I'd ask and see if I could do it the "right way"

 

[cranetruck]

First item in the "Technical Manuals" section on the left here, should give you the formal installation instructions.

 

[jwaller]

First item in the "Technical Manuals" section on the left here, should give you the formal installation instructions.

ya, I've looked at it a dozen times but the section that covers the lower portion of the installation isnt clear to me. pics would be better

 

[ida34]

If anyone needs the mounting springs for the winter front grill cover, I have a friend with them new in bag

thanks.

Blake,
PM sent on springs.

Chuck