WECSOG
Member
- 68
- 2
- 8
- Location
- Prescott, AZ
Was looking at Gov Planet and saw a M1009 for sale with a Pioneer tool rack mounted above the left rear tire wheel well. Was this a common practice?
Pic below.
Pic below.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Pioneer tool rack in a M1009?
- Thread starter WECSOG
- Start date
- 4,763
- 1,164
- 113
- Location
- Gaithersburg, MD
I don't believe this was common...it was not found in a large percentage of M1009s...but I've seen it before. I've also seen mounts for jerry cans, but again, I don't think it is too common.
amgeneral72
Active member
- 487
- 124
- 43
- Location
- HOLLY SPRINGS GA
I like it.
I have one mounted on the rear quarter.
I have one mounted on the rear quarter.
0331king
New member
- 15
- 10
- 3
- Location
- Clarksville Tn
I’ve considered mounting a M35/37 style pioneer kit on the back of my ‘09 once I switch to a truck tailgate. I’m also considering a MaxAxe to save weight.
Never actually seen a CUCV with one while on active duty.
Never actually seen a CUCV with one while on active duty.
Last edited:
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Rack looks much better mounted inside.
Good spot there on the left wheel well.
Good spot there on the left wheel well.
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
I had one mounted on the rear seat back. I used the existing seat hinge bolts to attach a piece of 12 gauge steel and the rack was mounted on that. Sold the M1009 back when 35 mm was my go to camera. Doubt I took pictures of it but it worked well and the seat never folded anyway.