Dieselsmoke
New member
- 1,146
- 2
- 0
- Location
- CA/NV
Anyone got a PLGR GPS external/vehicle mount antenna they want to get rid of???
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I have a few of those too. Near as I can figure, the cable itself is meant to hook into the back of the SINCGARS vehicle mount at the GPS connector, as it won't hook up to a PLGR with that cable, though the antenna itself will work if you have the appropriate cable for the PLGR.Found these on ebay and bought them. What does the cable actually hook upto?
Seems like the DAGR unit would work, being on the safe side. Garmin, nor any merchant, published specs on the antenna compatibilities of the Montana 600-series. Instead, they just point you to a model of antenna to sell the end-user. Luckily, someone somehow got some specs for the antenna itself, which is going to be wide-ranged: http://www.gpsinformation.org/allory/ga25mcx/ga25mcx.htmlI believe they do. The prc68 website has a lot of good info on both the dagr and plgr units and specific info on each of the antenna. Plgr are round and 3v and the dagr are oval and 5v but backwards compatible to 3v.
There is a lot of specifics there on the architecture for communication but I am not versed on them as I am just learning. I scored a good deal on one of the latter model plgr and I am in " learning " mode.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!