- 2,677
- 8,647
- 113
- Location
- Alexandria, La
Ok all,
My pop off valve (when you build pressure it pops off) is sticking in the half open position after I build air, bleeding it slowly down.
I had this issue once before and for a temporary fix I followed the advice of @fuzzytoaster and used an extension and hammer to whack it back into place. Now it's consistently sticking, so I need to take it apart and see what's going on.
I know I could spray it with lube, but that only attracts more dirt etc, so I would like to clean it so it's "dry".
My issue is I don't know the proper term to search in the TMs. Any help?
My pop off valve (when you build pressure it pops off) is sticking in the half open position after I build air, bleeding it slowly down.
I had this issue once before and for a temporary fix I followed the advice of @fuzzytoaster and used an extension and hammer to whack it back into place. Now it's consistently sticking, so I need to take it apart and see what's going on.
I know I could spray it with lube, but that only attracts more dirt etc, so I would like to clean it so it's "dry".
My issue is I don't know the proper term to search in the TMs. Any help?