Post Eco-Hub Speedometer Adjust

[Shakkles]

Who knows the correct dip switch settings for the A0 speedometer once Eco-Hubs are installed?

 

[Ronmar]

Its in the last page of the ecohubs discussion. 123 and 10 off, all the rest on If I recall correctly…

 

[Shakkles]

Its in the last page of the ecohubs discussion. 123 and 10 off, all the rest on If I recall correctly…

There are many, many eco-hubs discussions. I don't know which one you mean and i'm still finding new ones.
You said 123. Did you mean #1, #2, and #3? And if so, is that from the left or from the right? From the mess of posts and threads i can't find where people have even come to a consensus about which it is. Lot's of people have figured it out and even stating such in testimonials and not one person i've read actually just shared the number.

 

[ckouba]

Each dip switch should have a number over it, and the ones marked 1, 2, 3, & 10 should be set to off.

I can't confirm that as I don't have an A0, but that's the gist of the post.

 

[Ronmar]

There are many, many eco-hubs discussions. I don't know which one you mean and i'm still finding new ones.
You said 123. Did you mean #1, #2, and #3? And if so, is that from the left or from the right? From the mess of posts and threads i can't find where people have even come to a consensus about which it is. Lot's of people have figured it out and even stating such in testimonials and not one person i've read actually just shared the number.

The one started by the creator when he introduced them. Page 36, post #710… and I did remember correctly, 123&10 are off, the rest are on…, that from Mike the creator of the ecohub… look closely at the dip switch, they are numbered and usually indicate the on or off position of the individual switches.

ECO Hubs Who needs 3:07 gears?

Only flat roads so far here in Florida. Blue Fire was just a lot of trial and error in the program. Our Bluefire Instant Fuel Economy text gauge works, though Average Fuel Economy does not. I haven't figured out how to get useful Trip readings either. I haven't researched how as yet, though...

www.steelsoldiers.com

 

[TOBASH]

The one started by the creator when he introduced them. Page 36, post #710… and I did remember correctly, 123&10 are off, the rest are on…, that from Mike the creator of the ecohub… look closely at the dip switch, they are numbered and usually indicate the on or off position of the individual switches.

ECO Hubs Who needs 3:07 gears?

Only flat roads so far here in Florida. Blue Fire was just a lot of trial and error in the program. Our Bluefire Instant Fuel Economy text gauge works, though Average Fuel Economy does not. I haven't figured out how to get useful Trip readings either. I haven't researched how as yet, though...

www.steelsoldiers.com

Perhaps you meant “the PRODUCT creator”?

Don’t make me take you to the Chaplain’s office/forum.

 

[Ronmar]

IDK, he did a REALLY good job on them...