Pribbs m105a3 rims on deuce?

[Ben613]

Hi all, just throwing an idea out there...will the m105a3 7.5r22.5 rims fit the deuce? If so.....The world of 22.5 recap drives is plentiful! I for one think it would be great to run the same tire that every other truck on the road runs....(11r22.5)

Anyone tried fitting them?

Thanks,

Ben

 

[tobyS]

It appears they will fit but not in a dual configuration. Personally I don't like budds on the front and could see them used there, but I like the width of budds on the back. Are these wheels plentiful? First choice is the A3 wheel for the front of a deuce with 365's (14.5) with 11.00r20 budd rears.

 

[SETOYOTA]

Isuzu NPR wheels fit the deuce. 1992- 2008 I believe. They come up to a 19.5 wheel. I have also seen older school bus one piece wheels with the same bolt pattern

 

[Ben613]

It appears they will fit but not in a dual configuration. Personally I don't like budds on the front and could see them used there, but I like the width of budds on the back. Are these wheels plentiful? First choice is the A3 wheel for the front of a deuce with 365's (14.5) with 11.00r20 budd rears.

I don't think they're very plentiful....just another option for a rim on our trucks. Correct me if I'm wrong...but, aren't those m105a3 rims hub centric versus the deuce's lug centric....

Ben

 

[Ben613]

Isuzu NPR wheels fit the deuce. 1992- 2008 I believe. They come up to a 19.5 wheel. I have also seen older school bus one piece wheels with the same bolt pattern

I have seen some npr's at my local salvage....they only have 16's and 16.5's on 'em.
Another goal of mine is to be at or a little over the height of 9.00 ndt's...

Ben

 

[tobyS]

It's hard to see the detail for hub or stud centered on most photo's but here is one that seems to show it on e-pay. Use this title: [FONT=&quot]Utility Tool & Trailer Pneumatic Tire Rim Wheel Blk 129374 M105A3 Cargo Trailer[/FONT] . It says the OD is 23" so that would have to be 19.5, not 16.5.

 

[Ben613]

OD of 23" would mean it takes a 22.5" tire I believe...
I think I might just order one and see.....